Handle Bar(Boxer 150 SPC ES)
- $0.00
Handle Bar
(Boxer 150 SPC ES)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | 39 1943 04 | Flange Bolt | 2 | For Ignition Switch |
| 02 | DS 1810 22 | Switch Ignition Assly | 1 | |
| 02A | PF 2326 01 | 3 in One lock set | 1 | |
| 03 | DJ 2210 03 | Mirror Assly LH | 1 | |
| 04 | DJ 2210 04 | Mirror Assly RH | 1 | |
| 05 | DU 1910 09 | Grip RH | 1 | |
| 06 | JB 4014 00 | Control Switch LH | 1 | |
| 07 | DJ 1910 54 | Holder LH | 1 | |
| 07a | JB 1610 08 | Lever & Holder assly LH | 1 | |
| 08 | DJ 1910 55 | Lever Control LH | 1 | |
| 08a | DL 1910 13 | Lever Grip Left | 1 | |
| 09 | 36 DK00 37 | Kit Mirror Holder | 2 | Refer Page No. 98 |
| 10 | DD 1911 47 | Screw for Cable Adjuster | 2 | |
| 11 | DS 1910 52 | Boot For Lever LH | 1 | |
| 12 | 39 1074 04 | Flange Bolt | 4 | |
| 13 | 36 DS18 01 | Kit Holder Handle | 2 | |
| 14 | DS 1910 18 | Boot For Lever RH | 1 | |
| 15 | DD 1911 42 | Lever RH | 1 | |
| 15a | DX 1910 09 | Lever assly RH | 1 | |
| 16 | PF 4014 08 | Control Switch LH | 1 | |
| 17 | DU 1910 03 | Hand Grip Assly RH | 1 | |
| 18 | DU 1910 04 | Throttle Pipe | 1 | |
| 19 | DS 1910 33 | Holder RH | 1 | |
| 20 | PF 4014 04 | Brake Switch | 1 | |
| 21 | DU 1810 21 | Handle Bar | 1 | |
| 22 | DS 1810 07 | Washer Handle Upper | 2 | |
| 23 | DS 1810 08 | Damper Handle Upper | 2 | |
| 24 | DS 1810 05 | Holder Fork Upper | 1 | |
| 25 | DS 1810 09 | Damper Handle Lower | 2 | |
| 26 | DS 1810 10 | Washer Handle Lower | 2 | |
| 27 | 39 2249 15 | Nylock Nut | 2 | |
| 28 | JB 4014 09 | Clutch Switch | 1 | |
| 29 | 30 1910 48 | Band | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Boxer SPC ES 150cc |
| Engine | 150 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
