Front Hub(DISCOVER_100_SPC (4G & 5G))
- $0.00
Front Hub
(DISCOVER_100_SPC
(4G & 5G))
| Sub-part-figure Number | Item Code | Sub Part Name | KS Drum | ES Drum | Remarks |
|---|---|---|---|---|---|
| 01 | LC J000 01 | U Nut (M10) | 1 | 1 | |
| 01A | PA 1310 02 | Axle Front Wheel | 1 | 1 | |
| 02 | 39 1510 11 | Plain Washer | 1 | 1 | |
| 03 | PA 1316 02 | Spacer + Dust Seal (Assly) | 1 | 1 | (N.I.) |
| 04 | 39 2680 20 | Bearing Ball | 1 | 1 | |
| 05 | PA 1310 03 | Oil Seal | 1 | 1 | |
| 06 | PA 1316 00 | Collar Bearing | 1 | 1 | |
| 07 | 39 2681 20 | Ball Bearing | 1 | 1 | |
| 08 | 30 1511 05 | Shoe Brake Assembly | 1 | 1 | |
| 09 | 30 1510 69 | Spring | 2 | 2 | |
| 10 | 14 1510 21 | Oil Seal | 1 | 1 | |
| 11 | DS 1510 89 | Cam Brake Assly. | 1 | 1 | |
| 12 | PA 1318 01 | Panel Front Brake | 1 | 1 | |
| 13 | 30 1510 38 | Ring ‘O’ | 1 | 1 | |
| 14 | DS 1510 91 | Indicator | 1 | 1 | |
| 15 | DS 1510 95 | Bolt | 1 | 1 | |
| 16 | DS 1510 92 | Lever Brake Cam | 1 | 1 | |
| 17 | DS 1510 94 | Nut | 1 | 1 | |
| 18 | 39 0840 01 | Pan Headed Screw | 1 | 1 | |
| 19 | 39 0263 12 | Washer Spring | 1 | 1 | |
| 20 | 30 1511 18 | Stopper for Bushing | 1 | 1 | |
| 21 | LB D000 01 | Screw (Speedo Cable Fitting) | 1 | 1 | A/t. 39084101 |
| 22 | 36 DS15 02 | Kit Speedo + Meter Gear | 1 | 1 | |
| 23 | 301510 42 | Washer Plain | 2 | 2 | For Gear Meter |
| 24 | 391013 21 | ‘O’ Ring | 1 | 1 | |
| 25 | JA 1316 06 | Bushing Speedo Gear | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Discover 100 REV 03 JUL 13 |
| Engine | 100 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
