Front Fork(Dominor 400)
- $0.00
Front Fork
(Dominor 400)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty ABS | Qty NON-ABS | Remarks |
|---|---|---|---|---|---|
| 01 | JF 1210 29 | Front Fork Assembly | 1 | 1 | |
| 02 | DT 1210 01 | Tube Outer LH | 1 | 1 | |
| 03 | DT 1210 02 | Tube Outer RH | 1 | 1 | |
| 04 | KA CF10 30 | Bolt Socket | 2 | 2 | |
| 05 | DK 1810 07 | Copper Washer | 2 | 2 | |
| 06 | DT 1210 16 | Washer Seal | 2 | 2 | |
| 07 | 36 JF00 63 | Kit Fork Oil Seals | 2 | 2 | Refer Kit List |
| 08 | DT 1210 15 | Guide Bush | 2 | 2 | |
| 09 | DT 1210 13 | Washer | 2 | 2 | |
| 10 | JF 1210 38 | Spacer Tube | 2 | 2 | |
| 11 | JF 1210 36 | Fork Tube Inner | 2 | 2 | |
| 12 | 36 JF00 62 | Kit Cylinder Comp Fork | 2 | 2 | Refer Kit List |
| 13 | JF 1210 37 | Main Spring | 2 | 2 | |
| 14 | DT 1210 20 | Fork Bolt | 2 | 2 | |
| 15 | DT 1210 21 | O' Ring | 2 | 2 | |
| 16 | JF 1210 33 | Under Bracket Assembly | 1 | 1 | |
| 17 | JF 1812 85 | Cover Cushion | 4 | 4 | |
| 18 | JF 1812 84 | Cover Trail | 4 | 4 | |
| 19 | JF 1812 83 | Tube Fork Cover | 2 | 2 | |
| 20 | LA D001 93 | Bolt Steering Top | 1 | 1 | |
| 21 | DK 1810 25 | Spring Washer | 2 | 2 | |
| 22 | KA CM10 35 | Bolt | 2 | 2 | |
| 23 | JF 1210 34 | Leg Assembly LH | 1 | 1 | |
| 24 | JF 1210 35 | Leg Assembly RH | 1 | 1 | |
| 25 | JF 1210 29 | Bolt Flanged | 1 | 1 | |
| 26 | PD 1510 06 | Cup Steering | 1 | 1 | |
| 27 | DK 1810 75 | Nut Steering | 1 | 1 | |
| 28 | JF 1510 48 | Anti - Abrasive Tape | 1 | -- | |
| 29 | JF 1210 45 | Bracket Speed Sensor Cable | 1 | -- | |
| 30 | JF 1210 19 | Spring Washer | 1 | 1 | |
| 31 | 36 JU00 19 | Kit Fork Oil seal | 2 | 2 | Refer Kit Details |
| 32 | JF 1318 53 | Bracket Hose Clamp | 1 | -- |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Dominor 400 |
| Engine | 400 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
