Transmission(PLATINA 125 SPC)
- $0.00
Transmission
(PLATINA 125 SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | ES Drum | Remarks |
|---|---|---|---|---|
| 01 | JD 5510 00 | Shaft Input Transmission | 1 | From Jul 2010 |
| 02 | JD 5512 07 | Gear 4th Drive | 1 | |
| 03 | 39 0987 17 | Ring Snap | 5 | |
| 04 | JA 5510 02 | Spline Washer | 4 | |
| 05 | JD 5512 06 | Gear 3rd Drive | 1 | |
| 06 | JD 5512 05 | Gear 5th Drive | 1 | |
| 07 | JD 5512 01 | Gear 2nd Drive | 1 | |
| 08 | JA 5510 04 | Washer Thrust 2nd Drive | 1 | |
| 09 | JD 5510 02 | Shaft Output Transmission | 1 | |
| 09 | JV 5510 02 | Shaft Output Transmission | 1 | |
| 10 | JD 5512 08 | Bush 2nd Driven | 1 | |
| 10 | JZ 5512 05 | Bush 2nd Driven | 1 | From Jul 2010 |
| 11 | JD 5512 02 | Gear 2nd Driven | 1 | |
| 12 | JD 5512 03 | Gear 5th Driven | 1 | |
| 13 | JD 5512 04 | Gear 3rd Driven | 1 | |
| 14 | JD 5512 00 | Gear 4th Driven | 1 | |
| 15 | JA 5510 07 | Bush 1st Driven | 1 | |
| 15 | JZ 5510 05 | Bush 1st Driven | 1 | From Jul 2010 |
| 16 | JA 5512 06 | Gear 1st Driven | 1 | |
| 16 | JZ 5510 04 | Bush 1st Driven | 1 | From Jul 2010 |
| 17 | JD 5512 09 | Spline Washer | 1 | |
| 18 | JA 5510 08 | Washer Thrust 1st Driven | 1 | |
| 19 | JA 5510 09 | Collar Sprocket Drive | 1 | |
| 20 | 59 2100 24 | ‘O’ Ring Collar Sprocket | 1 | |
| 21 | JV 5510 00 | Sprocket Drive (15 T) | 1 | |
| 22 | DU 1012 13 | Plate Lock Sprocket | 1 | |
| 23 | 39 1981 04 | Socket Head Bolt | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Platina 125 CC |
| Engine | 125 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
