CRANKCASE LH(Pulsar 180 SPC UG3)
- $0.00
CRANKCASE LH
(Pulsar 180 SPC UG3)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DJ 1012 74 | Crankcase LH | 1 | |
| 02 | 39253105 | Stud | 2 | |
| 03 | DH 1016 54 | Guide starter Assly | 1 | |
| 04 | 39218819 | Oil Seal | 1 | |
| 05 | DH 1014 23 | O’ Ring | 1 | |
| 06 | 39075201 | C’ Sunk Head Screw | 3 | |
| 07 | 39260320 | Bearing Ball (For Input shaft) | 1 | |
| 08 | 39258320 | Bearing Ball (For Output shaft) | 1 | |
| 09 | 39218520 | Balancer LH Bearing | 1 | |
| 10 | 39218919 | Oil Seal (For Output shaft) | 1 | |
| 11 | 39219019 | Oil Seal (For Shift lever) | 1 | |
| 12 | DH 1012 03 | Breather pipe | 1 | |
| 13 | DH 1012 46 | Rubber tube | 1 | |
| 14 | 28101174 | Spring Clip | 1 | |
| 15 | DH 1012 72 | Plug (Drain Bolt) | 1 | |
| 16 | DG 1014 98 | Gasket (For Drain Bolt) | 1 | |
| 17 | 31201081 | Switch comp.(Neutral) | 1 | |
| 18 | DH 1017 84 | Gasket Neutral Switch | 1 | |
| 19 | DH 1012 69 | Baffle | 1 | |
| 20 | 39141402 | Self tapping Screw | 1 | |
| 21 | 39184504 | Flanged Bolt | 1 | |
| 22 | 39167704 | Bolt | 8 | |
| 23 | 39230504 | Bolt | 1 | |
| 24 | DH 1012 78 | Plug Starter Motor | 1 | |
| 25 | DH 1011 69 | Bush starter gear inner | 1 | |
| 26 | DJ 2010 21 | Cable assly. (Battery to Earth) | 1 | |
| 27 | 39244811 | Plain Washer | 1 | |
| 28 | DH 1014 22 | Damper | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 180 UG3. |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
