FRONT FORK(Pulsar 200cc_ SPC)
- $0.00
FRONT FORK
(Pulsar 200cc_ SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JC 1810 01 | Fork front | 1 | |
| 02 | DG 1810 21 | Dust seal | 1 | |
| 03 | DG 1810 23 | Oil seal | 2 | |
| 04 | DG 1810 13 | Guide bush | 2 | |
| 05 | DG 1810 22 | Ring snap | 1 | |
| 06 | JC 1810 11 | Outer Tube LH | 1 | |
| 07 | JC 1810 12 | Outer Tube RH | 1 | |
| 08 | 30181026 | Gasket | 2 | |
| 09 | 30181025 | Bolt | 2 | |
| 10 | DS 1810 77 | Cylinder comp. fork | 2 | |
| 11 | JC 1810 21 | Pipe comp. suspension inner | 2 | |
| 12 | DG 1810 11 | Slide Bush | 2 | |
| 13 | JC 1810 17 | Spring front fork | 2 | |
| 14 | DH 1810 09 | Grommet Top | 2 | |
| 15 | DH 1810 15 | Bolt fork | 2 | |
| 16 | 30181029 | ‘O’ ring | 2 | |
| 17 | 30181028 | Seat fork spring | 2 | |
| 18 | DS 1810 85 | Spacer Tube | 2 | |
| 19 | DG 1810 03 | Washer | 2 | |
| 20 | 59040005 | Bolt | 1 | |
| 21 | JC 1810 02 | Holder fork upper | 1 | |
| 22 | DG 1810 08 | Socket Bolt | 2 | |
| 23 | JC 1810 07 | Cushion Rubber | 2 | |
| 24 | JC 1810 06 | Cover Trail B | 4 | |
| 25 | 52 JC00 19 | Lamp Shade asly. | 1 | |
| 26 | DG 1810 45 | Bearing cone | 1 | |
| 27 | JC 1810 03 | Holder fork under | 1 | |
| 28 | 39078912 | Spring washer | 2 | |
| 29 | 39181304 | Bolt | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 200 NOV 08 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
