FRONT FORK(Pulsar 220 BS3 REV03DEC14)
- $0.00
FRONT FORK
(Pulsar 220 BS3 REV03DEC14)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DK 1810 72 | Fork front | 1 | |
| 02 | DK 1810 19 | Oil seal | 2 | |
| 03 | DK 1810 56 | Outer Tube LH | 1 | |
| 04 | DK 1810 57 | Outer Tube RH | 1 | |
| 05 | DK 1810 07 | Copper Washer | 2 | |
| 06 | DK 1810 06 | Bolt | 2 | |
| 07 | DK 1810 10 | Seat Pipe (Cylinder comp. fork) | 2 | |
| 08 | DK 1810 70 | Pipe comp. suspension inner | 2 | |
| 09 | DK 1810 11 | Slide Bush | 2 | |
| 10 | DK 1810 73 | Spring front fork | 2 | |
| 11 | DK 1810 22 | Bolt fork | 2 | |
| 12 | DK 1810 23 | ‘O’ ring | 2 | |
| 13 | 30181028 | Seat fork spring | 2 | |
| 14 | DK 1810 71 | Spacer Tube | 2 | |
| 15 | DK 1810 48 | Clamp for brake hose lower | 1 | |
| 15A | DK 1810 37 | Clamp for brake hose upper | 1 | |
| 16 | DK 1810 18 | Washer | 2 | |
| 17 | 59040005 | Bolt | 1 | |
| 18 | JC 1810 23 | Cushion Rubber | 2 | |
| 19 | JC 1810 22 | Cover Trail B | 4 | |
| 20 | JC 1810 24 | Lamp Shade asly. | 1 | |
| 21 | DG 1810 05 | Bearing cone | 1 | Included in kit 36 DV00 07 |
| 22 | DK 1810 24 | Holder fork under | 1 | |
| 23 | DK 1810 25 | Spring washer | 2 | |
| 24 | DK 1810 08 | Flange Bolt | 2 | |
| 25 | DK 1810 17 | Guide bush | 1 | |
| 26 | DK 1810 13 | Rebound spring | 2 | |
| 27 | 36314004 | Fork Oil Bottle 160 ml | 1 | |
| 28 | DK 1810 09 | Cap Oil Lock | 2 | |
| 29 | DK 1810 12 | Piston Ring | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 220 BS3 REV03DEC14 |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
