Front Fork(Pulsar 135 UG + BS)
- $0.00
Front Fork
(Pulsar 135 UG + BS)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JD 1510 00 | Fork Front | 1 | |
| 02 | 36 DZ00 20 | Front Fork Seal Kit | 1 | Refer Kit List |
| 03 | 30181026 | Gasket | 2 | |
| 04 | 30181025 | Bolt Socket Head | 2 | |
| 05 | JD 1510 26 | Fork Inner Pipe | 2 | |
| 06 | DJ 1811 04 | Spring Front Fork | 2 | |
| 07 | 59040007 | Bolt upper bkt. | 2 | |
| 08 | DS 1810 15 | Cap Nut Fork | 1 | |
| 09 | DS 1810 16 | Plain Washer | 1 | |
| 10 | 36 DS18 02 | Bearing Cone Kit | 1 | Refer Kit List |
| 11 | JD 1510 29 | Under Bracket Assembly | 1 | |
| 12 | 39118101 | Bolt Hexagon Head | 2 | |
| 13 | DM 1810 10 | Washer | 2 | |
| 14 | JD 1510 03 | Outer Tube LH with Guide Bush | 1 | |
| 15 | JD 1510 04 | Outer Tube RH | 1 | |
| 16 | JK 1210 07 | Anti Friction Bush | 2 | |
| 17 | JD 1210 02 | Cylinder Complete Fork | 2 | |
| 18 | JK 1210 09 | Washer Anti Friction Bush | 2 | |
| 19 | JD 1510 28 | Bolt Fork | 2 | |
| 20 | 30181029 | ‘O’ Ring | 2 | |
| 21 | JD 1510 36 | Cup Washer | 2 | |
| 22 | LA C000 09 | Bolt Socket M10 | 2 | |
| 23 | JD 1510 06 | Lamp Shade Assembly | 1 | |
| 24 | DJ 1810 64 | Grommet Head Lamp Mounting | 1 | |
| 25 | DJ 1810 29 | Collar Head Lamp Mounting | 4 | |
| 26 | DJ 1810 52 | Cover Trail ‘B’ | 4 | |
| 27 | DJ 1810 85 | Cushion Rubber | 4 | |
| 28 | JD 1510 01 | Leg Assembly LH | 1 | |
| 29 | JD 1510 02 | Leg Assembly RH | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 135 UG + BSIV |
| Engine | 135 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
