Front Hub(PULSAR NS 200 ABS & AS 200 SPC)
- $0.00
Front Hub
(PULSAR NS 200 ABS & AS 200 SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty 200 NS | Qty 200 AS | Remarks |
|---|---|---|---|---|---|
| 01 | JL 1310 04 | Wheel Front | 1 | 1 | |
| 02 | JG 1310 01 | Spacer | 1 | 1 | |
| 02A | DT 1310 17 | Collar Front Wheel | 1 | -- | For ABS Model |
| 03 | 39224120 | Bearing - Ball | 2 | - | |
| 03 | KP BC62 02 | Bearing - Ball | 2 | 2 | For NS 200 ABS |
| 04 | DG 1510 05 | Seal - Oil | 1 | 1 | |
| 05 | JL 1310 05 | Disc Front | 1 | - | |
| 05 | 52 JL01 41 | Assembly Disc Front | 1 | 1 | Ref. Ser. Cir. D-62 |
| 05 | DT 1318 02 | Disc 300 mm | 1 | -- | For ABS version |
| 06 | JD 1318 11 | Special Bolt M8 | 6 | 6 | |
| 07 | JL 1310 00 | Collar | 1 | 1 | |
| 08 | JC 1510 20 | Case Meter W/O Sensor | 1 | 1 | |
| 09 | JC 2010 46 | Stopper | 1 | 1 | N.I. Sensor Mtg |
| 10 | 59210019 | ‘O’ Ring | 1 | 1 | N.I. Sensor |
| 11 | 39090012 | Washer - Spring | 1 | 1 | N.I. Sensor Mtg |
| 11 | KD DB04 08 | Washer Spring Thin | 1 | - | Model BS IV |
| 12 | 39084001 | Screw Pan Cross - M4 | 1 | 1 | N.I. Sensor Mtg |
| 12 | KB BA04 08 | Screw Pan Cross | 1 | - | Model BS IV |
| 13 | JL 1310 01 | Axle | 1 | 1 | |
| 14 | LD B000 29 | Washer | 1 | 1 | |
| 15 | LC J000 02 | Nut - U M14 | 1 | 1 | |
| 16 | DT 1318 78 | Clamp W ABS Hose | 1 | - | For ABS Model |
| 17 | JU 1318 01 | Sensor Disc Front | 1 | -- | For ABS Model |
| 18 | DT 4024 04 | Wheel Speed Sensor | 1 | -- | For ABS Model |
| 19 | 39194304 | Bolt | 1 | -- | For ABS Model |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR NS 200 ABS & AS 200 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
