Swing Arm / Rear Shock Absorber(Pulsar-RS-200-BS3)
- $0.00
Swing Arm / Rear Shock Absorber
(Pulsar-RS-200-BS3)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty. ABS | Qty. NON ABS | Remarks |
|---|---|---|---|---|---|
| 01 | DT 1220 19 | Shockabsorber Mono | 1 | 1 | |
| 02 | LA C000 19 | Bolt Socket M10 X 1.25 X 55 | 2 | 2 | |
| 03 | JL 1220 14 | Assembly Swing Arm Comp | 1 | 1 | |
| 04 | DG 1710 16 | Sleeve | 2 | 2 | |
| 05 | DG 1710 18 | Bearing - Needle | 2 | 2 | |
| 06 | DG 1710 19 | Seal - Oil | 4 | 4 | |
| 07 | JL 1220 02 | Cap Swing Arm Tube | 2 | 2 | |
| 08 | JL 1220 01 | Adjuster Chain LH | 1 | 1 | |
| 09 | JL 1220 09 | Adjuster Chain RH | 1 | 1 | |
| 10 | JL 1220 03 | Slider Chain | 1 | 1 | |
| 11 | 39045411 | Washer - Plain | 2 | 2 | |
| 12 | 39055302 | Screw - Self Tapping | 2 | 2 | |
| 13 | JL 1220 04 | Spacer Chain Adjuster | 2 | 2 | |
| 14 | JL 1220 08 | Spacer Central Swing Arm | 2 | 2 | |
| 15 | JL 1812 24 | Grommet I | 1 | 1 | |
| 16 | JL 1812 25 | Grommet II | 1 | 1 | |
| 17 | JL 1220 26 | Shaft - Swing Arm | 1 | 1 | |
| 18 | DT 1138 48 | Cap - Swing Arm pivot | 2 | 2 | |
| 19 | DG 1710 17 | Nut | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar -RS-200-BS3 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
