DIFFERENTIAL GEAR ASSEMBLY(RE 445 M, RE 600)
- $0.00
DIFFERENTIAL GEAR ASSEMBLY
(RE 445 M, RE 600)
| Sub-part-figure Number | Item Code | Sub Part Name | QTY. BH | QTY. BG | REMARKS |
|---|---|---|---|---|---|
| 1 | BH 5516 08 | Assembly differential Damper | 1 | -- | from 04.08.2011 |
| 1a | BG 5516 00 | Assembly gear differential | 1 | 1 | |
| 2 | BG 5516 13 | Housing Satellite-For damper | 1 | 1 | |
| 3 | 24130111 | Bush - bevel gear housing | 1 | 1 | |
| 4 | BH 5516 06 | Differential gear Damper | 1 | 1 | |
| 4a | BG 5516 18 | Differential hub | 1 | 1 | |
| 4b | BG 5516 15 | Damper integrated | 4 | 4 | |
| 5 | AL 1310 59 | Bevel gear diff. gear side | 1 | 1 | |
| 6 | AL 1310 58 | Satellite gear | 2 | 2 | |
| 7 | 22131014 | Spacer | 2 | 2 | |
| 8 | 24131032 | Pin bevel gear | 1 | 1 | |
| 9 | BA 1322 01 | Flange bolt | 6 | 6 | |
| 10 | BG 5516 14 | Pin | 1 | 1 | |
| 11 | BB 1311 99 | cover differential | 1 | 1 | |
| 12 | 30151065 | Ball bearing | 1 | 1 | |
| 13 | KP BB60 07 | Ball bearing (Sealed) | 2 | 2 | |
| 14 | BA 1322 57 | Seal - Oil - 50 X 10 | 2 | 2 | |
| 15 | AL 1310 76 | Oil plug | 1 | 1 | |
| 16 | 39156221 | ‘O’ ring | 1 | 1 | |
| 17 | BA 1321 22 | Hollow dowel | 2 | 2 | |
| 18 | AL 1310 20 | Gasket (Differential cover) | 1 | 1 | |
| 19 | 39197015 | Nut - Hexagon with flange-M8 | 2 | 2 | |
| 20 | AP 1210 74 | Clip | 1 | 1 | |
| 21 | BA 1021 46 | Tube breather | 1 | 1 | |
| 22 | BA 1022 07 | Breather pipe joint | 1 | 1 | |
| 23 | BA 1321 89 | Oil Plug | 1 | 1 | |
| 24 | 39158511 | Plain washer | 1 | 1 | |
| 25 | BH 5516 02 | Pinion differential | 1 | 1 | |
| 26 | 39153217 | Circlip external | 2 | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | RE 445 M |
| Engine | RE 445 M |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
