CARBURETTOR (KEHIN)(RE 4 Stroke Autoriksha)
- $0.00
CARBURETTOR
(KEHIN)
(RE 4 Stroke Autoriksha)
| Sub-part-figure Number | Item Code | Sub Part Name | QTY. AA | QTY. AF | QTY. AM | Remarks |
|---|---|---|---|---|---|---|
| 01 | AA 1210 90 | Carburettor | 1 | -- | -- | |
| 01 | AF 1211 89 | Carburettor | -- | 1 | 1 | |
| 02 | 28121028 | Spring compression | 1 | 1 | 1 | |
| 03 | AB 1210 22 | Valve throttle | 1 | 1 | 1 | |
| 04 | 28121030 | Plate needle clip | 1 | 1 | 1 | |
| 05 | AB 1210 23 | Needle jet | 1 | 1 | 1 | |
| 06 | 28121032 | Clip bar | 1 | 1 | 1 | |
| 07 | 28121037 | Spring compression(idle screw) | 1 | 1 | 1 | |
| 08 | AB 1210 24 | Screw adjust(idle screw) | 1 | 1 | 1 | |
| 09 | AB 1210 25 | Screw stop(air screw) | 1 | 1 | 1 | |
| 10 | 28121034 | Spring compression | 1 | 1 | 1 | |
| 11 | AB 1210 26 | Jet comp. Slow | 1 | 1 | 1 | |
| 12 | 28121040 | Pin arm | 1 | 1 | 1 | |
| 13 | AB 1210 27 | Holder needle jet | 1 | 1 | 1 | |
| 14 | AB 1210 28 | Jet main | 1 | -- | -- | |
| 14 | DD 1210 28 | Jet main | -- | 1 | 1 | |
| 15 | 28121043 | Screw washer | 2 | 2 | 2 | |
| 16 | 28121044 | Valve complete float | 1 | 1 | 1 | |
| 17 | 28121045 | Jet needle | 1 | 1 | 1 | N.I. |
| 18 | 28121046 | Gasket float chamber | 1 | 1 | 1 | |
| 19 | 28121047 | Drain screw | 1 | 1 | 1 | |
| 20 | 28121048 | 'O' ring - drain screw | 1 | 1 | 1 | |
| 26 | 28121052 | Dust cap, choke | 1 | 1 | 1 | |
| 27 | AB 1210 32 | Rubber pipe, air vent | 1 | 1 | 1 | |
| 28 | AB 1210 31 | Rubber pipe, over flow | 1 | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | BAJAJ RE 4S |
| Engine | BAJAJ RE 4S |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
