REAR HUB(PLATINA_125_DTS-Si_SPC_ESKS)
- $0.00
REAR HUB
(PLATINA_125_DTS-Si_SPC_ESKS)
| Sub-part-figure Number | Item Code | Sub Part Name | Platina ES | Platina KS |
|---|---|---|---|---|
| 01 | JB 1312 25 | Nut Hex | 1 | 1 |
| 02 | DS 1510 90 | Indicator | 1 | 1 |
| 03 | 36 JB00 03 | Chain Sprocket Kit | 1 | 1 |
| 04 | 39224020 | Bearing Ball | 1 | 1 |
| 05 | JK 1312 02 | Sleeve | 1 | 1 |
| 06 | DU 1510 10 | Coupling | 1 | 1 |
| 07 | 39097804 | 'D' bolt M-10 | 4 | 4 |
| 08 | 39079415 | Nut Hex Fine | 4 | 4 |
| 09 | 31151029 | Lock Washer | 2 | 2 |
| 10 | 39268220 | Ball bearing (12x37x12) | 1 | 1 |
| 10A | 39136420 | Ball bearing (12x32x10) | 1 | 1 |
| 11 | 31151018 | Collar Bearing | 2 | 2 |
| 12 | DX 1510 25 | Coupling Rubber Integral | 4 | 4 |
| 13 | JB 1312 22 | Wheel 1.6 x 17 | 1 | 1 |
| 14 | 30151069 | Spring | 2 | 2 |
| 15 | 31151060 | Shoe Brake | 1 | 1 |
| 16 | 31151023 | Brake Cam | 1 | 1 |
| 17 | JA 1312 05 | Panel Rear Brake | 1 | 1 |
| 18 | JK 1312 01 | Axle | 1 | 1 |
| 19 | JK 1312 04 | Collar | 1 | 1 |
| 20 | DX 1510 18 | Washer Plain | 4 | 4 |
| 21 | 39070815 | ‘U’ nut M12x1.25 | 4 | 4 |
| 22 | 30151038 | Ring 'O' | 1 | 1 |
| 23 | JK 1312 03 | Collar | 1 | 1 |
| 24 | DS 1510 94 | Hex Nut | 1 | 1 |
| 25 | JB 1316 05 | Lever Brake | 1 | 1 |
| 26 | 39080708 | Pin Cotter | 1 | 1 |
| 27 | DS 1510 94 | Hex Nut / Flange M6 | 1 | 1 |
| 28 | JB 1410 01 | Chanin lock set | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Platina DTS-Si ES / KS |
| Engine | 125 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
