HANDLE BAR(PLATINA_125_DTS-Si_SPC_ESKS)
- $0.00
HANDLE BAR
(PLATINA_125_DTS-Si_SPC_ESKS)
| Sub-part-figure Number | Item Code | Sub Part Name | Platina ES | Platina KS |
|---|---|---|---|---|
| 01 | DU 1810 21 | Handle | 1 | 1 |
| 02 | FD 1810 30 | Holder handle upper | 2 | 2 |
| 03 | 39107404 | Flanged bolt | 4 | 4 |
| 04A | JB 4014 01 | Control switch RH | 1 | -- |
| 04B | DU 2010 18 | Control switch RH | -- | 1 |
| 05 | JB 4014 00 | Control switch LH | 1 | -- |
| 06 | DJ 1910 54 | Holder left hand | 1 | 1 |
| 07A | DJ 1910 55 | Lever grip - Left | 1 | -- |
| 07B | DX 1910 08 | Lever grip - Left | -- | 1 |
| 08 | DL 1910 14 | Stud Lever handle | 2 | 2 |
| 09 | 39118415 | Nyloc nut | 2 | 2 |
| 10 | DU 1910 09 | Grip - Left hand | 1 | 1 |
| 11 | DS 1910 33 | Holder Right hand | 1 | 1 |
| 12 | DD 1911 42 | Lever grip - Right | 1 | 1 |
| 13 | DS 1910 33 | Front brake switch | 1 | 1 |
| 14 | DU 1910 03 | Grip assly RH | 1 | 1 |
| 15 | DS 1910 52 | Boot for Lever LH | 1 | 1 |
| 16 | 36 DU19 01 | Cable Adjuster kit | 1 | 1 |
| 17 | FD 1810 31 | Holder Handle Lower | 2 | 2 |
| 18 | DF 1810 91 | Damper Handle Upper | 2 | 2 |
| 19 | DF 1810 92 | Damper Handle Lower | 2 | 2 |
| 20 | FD 1810 19 | Washer Plain Upper | 2 | 2 |
| 21 | FD 1810 20 | Washer Plain Lower | 2 | 2 |
| 22 | 39224915 | Nylock Nut | 2 | 2 |
| 23 | DD 1911 47 | Adjusting screw | 2 | 2 |
| 24 | DS 1910 18 | Boot For Lever RH | 1 | 1 |
| 25 | DJ 2210 03 | Mirror assly. LH | 1 | 1 |
| 26 | DJ 2210 04 | Mirror assly. RH | 1 | 1 |
| 27 | JB 4014 09 | Clutch switch | 1 | -- |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Platina DTS-Si ES / KS |
| Engine | 125 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
