Handle Bar(PULSAR 180 UG_BS IV)
- $0.00
Handle Bar
(PULSAR 180 UG_BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | 56 DK33 Y9 | Upper Bracket | 1 | |
| 02 | 56 DK31 Y9 | Holder handle RH Black | 1 | |
| 03 | 56 DK32 Y9 | Holder handle LH Black | 1 | |
| 04 | DG 1810 08 | Socket Bolt | 4 | |
| 05 | JF 4014 00 | Control Switch LH | 1 | |
| 06 | JF 4014 01 | Control Switch RH | 1 | |
| 06A | JD 4014 00 | Control Switch RH | 1 | AHO Model |
| 07 | DJ 1910 82 | Lever & Support Holder Assembly | 1 | |
| 08 | DJ 1910 81 | Holder LH | 1 | |
| 09 | DJ 1910 83 | Lever LH | 1 | |
| 10 | DL 1910 14 | Stud Lever Handle | 1 | |
| 11 | 39118415 | Nyloc Nut - M5 x 0.8 | 1 | |
| 12 | 36 DU19 01 | Cable Adjust Kit | 1 | |
| 13 | 30191017 | Check Nut | 1 | |
| 14 | DJ 2012 46 | Clutch Switch | 1 | |
| 15 | LB U000 12 | Screw For Clutch Switch | 2 | |
| 16 | KA DD06 25 | Bolt Flanged | 1 | |
| 17 | DH 1910 67 | Grip LH | 1 | |
| 18 | DH 1910 69 | Grip Assembly RH | 1 | |
| 19 | DH 1910 68 | Grip RH | 1 | |
| 20 | DH 1910 17 | Pipe throttle | 1 | |
| 21 | DS 1910 52 | Lever Boot LH | 1 | |
| 22 | DK 1810 43 | Handle bar weight | 2 | |
| 23 | 39242704 | Hex. Socket HD Cap Screw | 2 | |
| 24 | JB 4014 02 | Ignition Switch Assembly | 1 | |
| 25 | 39168004 | Flange Bolt | 2 | |
| 26 | DK 1810 31 | Bush Silent Handle Bar Tube | 2 | |
| 27 | 39118011 | Washer | 2 | |
| 28 | DK 1810 79 | Bolt | 2 | |
| 29 | DK 1810 36 | Plug Handle Holder | 2 | |
| 30 | DK 1810 46 | Handle Bar Tube Assembly LH | 1 | |
| 31 | DK 1810 47 | Handle Bar Tube Assembly RH | 1 | |
| 32 | DH 1811 30 | Lock Set | 1 | |
| 33 | DJ 2210 03 | Mirror Assly. LH | 1 | |
| 34 | DJ 2210 04 | Mirror Assly. RH | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 180 UG BS IV |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
