Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
---|---|---|---|---|
01 | DK 1810 87 | Fork Assembly Front | 1 | |
02 | DK 1810 21 | Inner Dust Seal | 2 | |
03 | DK 1810 19 | Oil seal | 2 | |
04 | DK 1810 90 | Outer Tube LH | 1 | |
05 | DK 1810 91 | Outer Tube RH | 1 | |
06 | DK 1810 07 | Copper Washer | 2 | |
07 | DK 1810 08 | Bolt | 2 | |
08 | DK 1810 10 | Seat Pipe | 2 | |
09 | DK 1810 92 | Fork Pipe Spinning | 2 | |
10 | DK 1810 11 | Slide Bush | 2 | |
11 | DK 1810 73 | Spring Main Spring | 2 | |
12 | DK 1810 22 | Bolt fork | 2 | |
13 | DK 1810 23 | ‘O’ ring | 2 | |
14 | DK 1810 93 | Spacer Tube | 2 | |
15 | DK 1810 18 | Washer Seal | 2 | |
16 | 59040005 | Bolt | 1 | |
17 | 56 DK33 Y9 | Upper Bracket | 1 | |
18 | DG 1810 08 | Socket Bolt | 2 | |
19 | JC 1810 23 | Cushion Rubber | 2 | |
20 | JC 1810 22 | Cover Trail B | 4 | |
21 | JC 1810 24 | Lamp Shade asly. | 1 | |
22 | DG 1810 45 | Bearing cone Upper | 1 | |
23 | DK 1810 24 | Under Bracket Sub Assembly | 1 | |
24 | DK 1810 25 | Spring washer | 2 | |
25 | DK 1810 28 | Bolt | 2 | |
26 | DK 1810 20 | Oil Seal Stopper | 2 | |
27 | DK 1810 17 | Guide Bush | 2 |
Specification | |
Quality | Bajaj Geniune Parts |
Model | PULSAR 180 UG BS IV |
Engine | 180 CC |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000