CLUTCH(Bajaj Avenger 180 SPC)
- $0.00
CLUTCH
(Bajaj Avenger 180 SPC)
| Sub-part-figure Number | Item Code | Sub-Part Name | Quantity | Serviceable | Chasis Number |
|---|---|---|---|---|---|
| 01 | DH101275 | NUT - SPECIAL | 1 | Y | |
| 02 | 36DV0001 | KIT SET PRIMARY DRIVEN ( AVENGER ) | 1 | ||
| 03 | DJ101150 | PLATE ASSEMBLY - CLUTCH | 1 | Y | |
| 03 | DK101075 | CLUTCH PLATE ASSEMBLY | Y | MD2DGDVZZNCL19035 | |
| 04 | DJ101179 | CLUTCH CENTER | 1 | Y | |
| 04 | DK101001 | CLUTCH CENTER | Y | MD2DGDVZZNCL19035 | |
| 05 | DH101344 | PLATE - CLUTCH PRESSURE | 1 | Y | |
| 05 | DK101163 | PLATE CLUTCH PRESSURE | Y | MD2DGDVZZNCL19035 | |
| 06 | DH101554 | DISC CLUTCH FRICTION (E TYPE) | 5 | Y | |
| 06 | DK101149 | CLUTCH FRICTION DISK | Y | MD2DGDVZZNCL19035 | |
| 07 | DH101557 | PLATE - CLUTCH | 5 | Y | |
| 07 | DK101151 | PLATE CLUTCH | Y | MD2DGDVZZNCL19035 | |
| 08 | DH101483 | SPRING - CLUTCH CAPACITY | 6 | Y | |
| 08 | DH101743 | SPRING CLUTCH (CAPACITY) | Y | MD2DGDVZZNCL19035 | |
| 09 | 39167404 | BOLT - FLANGE :- M6 X 25 | 1 | Y | |
| 10 | 39155304 | BOLT - FLANGE :- M6 | 6 | Y | |
| 11 | 39188020 | BEARING - BALL :- 15 X 32 X 9 (6002-C3) | 1 | Y | |
| 12 | DH101484 | HOLDER - CLUTCH | 1 | Y | |
| 12 | DK101078 | ASSEMBLY CLUTCH LIFTER ROD | Y | ||
| 13 | DH101485 | ROD - CLUTCH LIFTER | 1 | Y | |
| 14 | DH101374 | PLATE - GUIDE :- CLUTCH PRESSURE | 1 | Y | |
| 14 | DK101126 | SPACER CLUTCH | 1 | Y | |
| 15 | DH101520 | NUT - CLUTCH CENTER LOCK | 1 | Y | |
| 16 | DH101180 | LEVER ASSEMBLY | 1 | Y | |
| 17 | 39220011 | WASHER - PLAIN (PRIMARY DRIVE GEAR) | 1 | Y | |
| 18 | DK101150 | CLUTCH FRICTION DISK-B | 1 | Y | MD2DGDVZZNCL19035 |
| 19 | DK101255 | CLUTCH FRICTION DISK - C | 1 | Y | MD2DGDVZZNCL19035 |
| 20 | DK101155 | SPRING JUDDER | 1 | Y | MD2DGDVZZNCL19035 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Avenger 180 SPC |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
