Oil Cooler Assembly(PULSAR 160NS)
- $0.00
Oil Cooler Assembly
(PULSAR 160NS)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JE 5712 15 | Assembly 3 Layer Oil Cooler | 1 | |
| 02 | JE 5712 23 | Grommet Bracket Oil Cooler | 2 | |
| 03 | 39 1672 04 | Flange Bolt - M6 x 16 | 2 | |
| 04 | DK 1013 40 | 'O' Ring (Oil Cooler Pipe) | 1 | |
| 05 | JE 5712 40 | Bracket Upper Oil Cooler | 1 | |
| 06 | JE 5712 39 | Clamp - Oil Cooler | 1 | |
| 07 | JE 5712 27 | Sleeve Bkt Oil Cooler | 2 | |
| 08 | JE 5712 25 | Bracket Lower Oil Cooler | 1 | |
| 09 | KA DA06 10 | Bolt Flanged | 1 | |
| 10 | DK 1013 66 | Banjo Oil Cooler Pipe | 2 | |
| 11 | DK 1012 37 | Washer Copper Oil Cooler | 4 | |
| 12 | JE 5712 19 | Assembly Pipe Inlet 3 Layer Oil Cooler | 1 | |
| 13 | JE 5712 16 | Assly Pipe Outlet 3 Layer Oil Cooler | 1 | |
| 14 | JE 5712 18 | Rubber Tube Oil Cooler | 1 | |
| 15 | JF 1812 87 | Cowl Oil Cooler | 1 | |
| 16 | JF 1812 16 | Shroud LH | 1 | |
| 17 | JF 1812 17 | Shroud RH | 1 | |
| 18 | KB UA05 12 | Screw Truss | 4 | |
| 19 | DS 1410 12 | Grommet Side Cover FR | 2 | |
| 20 | JG 1812 59 | Rivet Snap | 3 | |
| 21 | JL 1812 56 | Grommet For Radiator Cowl | 2 | |
| 22 | 39 0711 11 | Plain Washer | 4 | |
| 23 | KC GA06 06 | Nut Hex Flanged | 2 | |
| 24 | KC BA06 05 | Nut Hex Thin | 2 | |
| 25 | JF 1138 22 | Stud Horn Mounting Bracket | 2 | |
| 26 | JE 5810 81 | Scoop Shroud | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 160 NS . |
| Engine | 160NS CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
