Petrol Tank, Cap Tank and Gauge Fuel(PULSAR 160NS)
- $0.00
Petrol Tank, Cap Tank and Gauge Fuel
(PULSAR 160NS)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JL 1718 10 | Fuel Tank Assembly Fuel Cock | 1 | |
| 02 | JF 2326 12 | Lock Set + Tank Cap | 1 | |
| 03 | KA CB05 16 | Bolt Master | 6 | |
| 04 | JL 1710 49 | Damper Ring Tank Cap | 1 | |
| 05 | 36 JL00 12 | Kit Tank Damper | 1 | |
| 06 | JL 4026 02 | Sensor Fuel Level | 1 | |
| 06A | DK 1410 28 | ‘O’ ring for Fuel Sensor | 1 | |
| 07 | KC GA05 05 | Nut - Flange | 4 | |
| 08 | JL 1710 37 | Breather Tube | 1 | |
| 09 | JL 1710 63 | Pipe - Drain | 1 | |
| 10 | JL 1718 02 | Filter Inline | 1 | |
| 11 | JF 1718 00 | Tube Fuel (Carburettor) | 1 | |
| 12 | JL 1710 35 | Tube Fuel (Tank) | 1 | |
| 13 | JL 1718 00 | Tap Fuel Assembly | 1 | |
| 14 | JL 1710 60 | O Ring-For Knob | 1 | |
| 15 | JL 1718 03 | Pin Snap For Knob | 1 | |
| 16 | JL 1718 01 | Knob Fuel Tap | 1 | |
| 17 | DD 1412 27 | Bolt - Flanged | 2 | |
| 18 | KA DF08 20 | Bolt Tank mtg Front | 3 | |
| 19 | JL 1710 19 | Sleeve Tank Mtg Front | 3 | |
| 20 | JL 1710 18 | Grommet Tank Mtg Front | 1 | |
| 21 | JL 1710 85 | Spring Fuel Tube | 1 | |
| 22 | BA 1220 03 | Pipe Clip | 6 | |
| 23 | JL 1710 20 | Grommet Tank Mtg Rear | 2 | |
| 24 | JL 1710 96 | Sealing Ring Fuel Cock | 1 | |
| 25 | 39 0740 11 | Washer (non Metallic) | 1 | |
| 26 | DG 1410 28 | Clamp | 1 | |
| 27 | KA DD06 12 | Bolt Flanged | 1 | |
| 28 | JL 1710 38 | Beading Tank LH | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 160 NS . |
| Engine | 160NS CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
