Number Plate / Tail Lamp Assembly(PULSAR 160NS)
- $0.00
Number Plate / Tail Lamp Assembly
(PULSAR 160NS)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | LB U000 09 | Screw Mashroom Head | 2 | |
| 02 | 39 2141 24 | Washer None Metallic | 2 | |
| 03 | JL 2328 06 | Plate Number - Front (Black) | 1 | |
| 05 | KA CA08 30 | Bolt Master KAC | 2 | |
| 06 | JL 2328 05 | Bracket Number Plate Mtg | 1 | |
| 07 | JL 4010 02 | Lamp Tail Assly | 1 | |
| 08 | 39 1907 01 | Screw - Truss Cross : M5 | 3 | |
| 09 | JL 1138 00 | Bracket Rear Blinker Mtg | 1 | |
| 10 | KA DD06 10 | Bolt Flanged | 2 | |
| 11 | JD 4010 07 | Rear Number Plate Lamp | 1 | |
| 12 | JG 4010 36 | Reflector - Reflex | 1 | |
| 12A | 39 2484 15 | Nut Hex Flanged | 1 | |
| 13 | JL 1138 03 | Bracket - Reflector Reflex Mtg | 1 | |
| 14 | KB BA05 14 | Screw - M5 | 2 | |
| 15 | KC GD06 06 | Nut Hex Flanged | 2 | |
| 16 | DF 1612 52 | Plate - Number :- Rear In Black | 1 | |
| 17 | KA DD06 10 | Bolt Flanged | 2 | |
| 18 | DJ 1612 29 | Nut Clip | 3 | |
| 19 | PA 4022 04 | Band (Length 110 MM) | 2 | |
| 20 | JL 2328 08 | Bracket Rr Number Plate Mtg | 1 | |
| 21 | JL 4010 16 | Cover Illumination Lamp | 1 | |
| 22 | JL 1138 11 | Grommet - Illumination Bkt | 2 | |
| 23 | JL 1138 12 | Sleeve - Illumination Bkt | 2 | |
| 24 | JL 1138 10 | Bracket Number Plate Illum. | 1 | |
| 25 | DP 1611 45 | Rear Number Plate Assembly | 1 | |
| 26 | KA DD08 25 | Bolt Flanged | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 160 NS . |
| Engine | 160NS CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
