Rear Hub(PULSAR NS 200 ABS & AS 200 SPC)
- $0.00
Rear Hub
(PULSAR NS 200 ABS & AS 200 SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty 200 NS | Qty 200 AS | Remarks |
|---|---|---|---|---|---|
| 01 | DK 1510 36 | Lock Set | 1 | 1 | |
| 02 | 36 JL00 09 | Kit Chain Sprocket | 1 | 1 | Refer Page No.107 |
| 03 | 39224120 | Bearing - Ball | 1 | - | |
| 03 | KP BC62 02 | Bearing - Ball | 1 | 1 | For NS from ABS |
| 04 | 39224220 | Bearing - Ball | 1 | - | |
| 04 | KP BC63 02 | Bearing - Ball | 1 | 1 | For NS from ABS |
| 05 | JL 1312 16 | Collar Bearing Assy | 1 | 1 | |
| 06 | JG 1312 19 | Coupling Rubber | 1 | - | |
| 06 | JL 1312 32 | Coupling Rubber | - | 1 | |
| 07 | JL 1312 25 | Coupling | 1 | 1 | |
| 08 | DK 1510 13 | Bearing Coupling | 1 | 1 | |
| 08 | KP AC60 05 | Bearing Ball | 1 | - | For ABS Model |
| 09 | DK 1510 12 | Oil Seal | 2 | 2 | |
| 09 | 30151082 | Oil Seal | 2 | - | Model BS IV |
| 10 | LA A000 19 | D Bolt | 6 | 6 | |
| 11 | JL 1312 26 | Washer 6 Rubber | 3 | 3 | |
| 12 | LC A000 09 | Nut | 6 | 6 | |
| 12 | LC L000 04 | Nut U Flange | 6 | - | Model ABS |
| 13 | JL 1312 03 | Axle | 1 | 1 | |
| 14 | DK 1510 15 | Sleeve | 1 | 1 | |
| 15 | JL 1312 11 | Spacer for Coupling | 1 | 1 | |
| 16 | JL 1312 18 | Disc Rear | 1 | - | |
| 16 | 52 JL01 42 | Assly Disc Rr JL Khi (black) | 1 | 1 | Ref. Ser. Cir. D-62 |
| 17 | 39203804 | Bolt Hex | 6 | 6 | |
| 18 | LD B000 29 | Washer | 2 | 2 | |
| 19 | LC J000 02 | Nut - U | 1 | 1 | |
| 20 | DK 1510 81 | Spacer I | 1 | 1 | |
| 21 | DK 1510 82 | Spacer II | 1 | 1 | |
| 22 | JU 1318 02 | Sensor Disc Rear | 1 | -- | For ABS Model |
| 23 | 39074601 | Screw | 3 | -- | For ABS Model |
| 24 | DT 4024 04 | Wheel Speed Sensor (ABS) | 1 | -- | For ABS Model |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR NS 200 ABS & AS 200 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
