Front Fork(Pulsar 150 BS3 UG4)
- $0.00
Front Fork
(Pulsar 150 BS3 UG4)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DH 1810 60 | Fork Front | 1 | |
| 01 | DH 1810 86 | Fork Front | 1 | C-21 dated 29/01/2010 |
| 01 | DH 1811 00 | Fork Front | 1 | From- 08.07.2010 |
| 02 | 36 DK00 20 | Kit Outer Tube | 1 | Ref Page No.104 |
| 03 | DJ 1810 87 | Oil Seal | 2 | |
| 04 | DH 1810 63 | Outer Tube Lh | 1 | |
| 05 | DH 1810 64 | Outer Tube Rh | 1 | |
| 05 | DH 1811 01 | Outer Tube Rh | 1 | From- 08.07.2010 |
| 06 | 30181026 | Gasket | 2 | |
| 07 | 30181025 | Bolt | 2 | |
| 08 | DS 1810 77 | Cylinder Comp. Fork | 2 | |
| 09 | DJ 1811 03 | Pipe Comp. Suspension Inner | 2 | |
| 09 | DH 1810 87 | Pipe Comp. Suspension Inner | 2 | C-21 dated 29/01/2010 |
| 10 | DS 1810 71 | Slide Bush | 2 | |
| 11 | 39078912 | Spring Washer | 2 | |
| 12 | 39181304 | Bolt | 2 | |
| 13 | DJ 1811 04 | Spring Front Fork | 2 | |
| 14 | DH 1810 09 | Grommet Top | 2 | |
| 15 | DH 1810 15 | Bolt Fork | 2 | |
| 16 | 30181029 | ‘O’ Ring | 2 | |
| 17 | 30181028 | Seat Fork Spring | 2 | |
| 18 | DS 1810 85 | Spacer Tube | 2 | |
| 18 | DH 1810 83 | Spacer Tube | 2 | C-21 dated 29/01/2010 |
| 19 | DM 1810 10 | Washer | 2 | |
| 20 | 30181044 | Bolt | 1 | |
| 21 | DH 1810 56 | Holder Fork Upper | 1 | |
| 21 | DH 1810 91 | Holder Fork Upper | 1 | C-21 dated 29/01/2010 |
| 22 | DG 1810 08 | Socket Bolt | 2 | |
| 23 | DJ 1810 85 | Cushion Rubber | 2 | |
| 24 | DJ 1810 52 | Cover Trail B | 4 | |
| 25 | DH 1810 66 | Lamp Shade Assly. | 1 | |
| 25 | DH 1810 92 | Lamp Shade Assly | 1 | C-21 dated 29/01/2010 |
| 26 | DH 1810 25 | Bearing Cone | 1 | |
| 27 | DJ 1810 41 | Holder Fork Under | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 150 BS3 UG4 |
| Engine | 150 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
