Oil Cooler Assembly(PULSAR 220_ BSIV REV)
- $0.00
Oil Cooler Assembly
(PULSAR 220_ BSIV REV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DK 1016 34 | Oil cooler assembly | 1 | |
| 02 | DK 1012 25 | Switch Oil Pressure | 1 | |
| 03 | DK 1013 40 | ‘O’ ring (Oil Cooler Pipe) | 1 | |
| 04 | DK 1610 81 | Rubber Grommet Fairing Lower Mtg. | 2 | |
| 05 | 39167204 | Flange Bolt | 4 | |
| 06 | DK 1016 30 | Pipe Inlet Oil Cooler | 1 | |
| 07 | DK 1016 31 | Pipe outlet oil cooler | 1 | |
| 08 | 39269704 | Hexagon head screw | 2 | |
| 09 | DK 1013 66 | Bolt Special Banjo | 2 | |
| 10 | DK 1012 37 | Copper Washer (oil cooler) | 2 | |
| 11 | DK 1611 88 | Cap Oil Cooler LH | 1 | |
| 12 | DK 1611 89 | Cap Oil Cooler RH | 1 | |
| 13 | DK 1016 35 | Cover Oil Cooler | 1 | |
| 14 | DK 1611 86 | Oil Cooler Cap Bracket LH | 1 | |
| 15 | DK 1611 87 | Oil Cooler Cap Bracket RH | 1 | |
| 16 | DK 1012 79 | Washer Cooler Pipe | 1 | |
| 17 | JB 4022 02 | Grommet oil Pressure Switch | 1 | |
| 18 | DK 1012 77 | Bracket Upper (Oil Cooler Pipe) | 1 | |
| 20 | DK 1012 78 | Bracket Lower (Oil Cooler Pipe) | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR-220 BS IV |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
