Handle Bar Assembly(PULSAR 220_ BSIV REV)
- $0.00
Handle Bar Assembly
(PULSAR 220_ BSIV REV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | 56 DK33 Y9 | Upper Bracket | 1 | |
| 02 | 56 DK31 Y9 | Holder handle RH Black | 1 | |
| 03 | 56 DK32 Y9 | Holder handle LH Black | 1 | |
| 04 | DG 1810 08 | Socket Bolt | 4 | |
| 05 | DT 4014 03 | Control Switch LH | 1 | |
| 06 | DT 4014 04 | Control Switch RH | 1 | |
| 6A | DT 4014 07 | Control Switch RH | 1 | AHO Model |
| 07 | DK 1910 23 | Lever & Support Holder Assembly | 1 | |
| 08 | DJ 1910 55 | Lever LH | 1 | |
| 09 | 39118415 | Nyloc Nut - M5 x 0.8 | 1 | |
| 10 | 30191017 | Check Nut | 1 | |
| 11 | DK 2010 83 | Clutch Switch | 1 | |
| 12 | 39155304 | Bolt Flanged | 1 | |
| 13 | DH 1910 07 | Grip LH | 1 | |
| 14 | DH 1910 14 | Grip Assembly RH | 1 | |
| 15 | DH 1910 08 | Grip RH | 1 | |
| 16 | DH 1910 17 | Pipe throttle | 1 | |
| 17 | DS 1910 52 | Lever Boot LH | 1 | |
| 18 | DK 1810 43 | Handle bar weight | 2 | |
| 19 | 39242704 | Hex. Socket HD Cap Screw | 2 | |
| 20 | DK 2010 15 | Ignition Switch Assembly | 1 | |
| 21 | 39168004 | Flange Bolt | 2 | |
| 22 | DK 1810 31 | Bush Silent Handle Bar Tube | 2 | |
| 23 | 39118011 | Washer | 2 | |
| 24 | DK 1810 79 | Bolt | 2 | |
| 25 | DK 1810 36 | Plug Handle Holder | 2 | |
| 26 | DK 1810 46 | Handle Bar Tube LH | 1 | |
| 27 | DK 1810 47 | Handle Bar Tube RH | 1 | |
| 28 | DK 1810 34 | Lock Set 4 In One With Two Track Key | 1 | |
| 29 | DK 2210 14 | Mirror Assembly LH | 1 | |
| 30 | DK 2210 15 | Mirror Assembly RH | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR-220 BS IV |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
