Front Fork Assembly(PULSAR 220_ BSIV REV)
- $0.00
Front Fork Assembly
(PULSAR 220_ BSIV REV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DK 1810 72 | Fork Front | 1 | |
| 02 | DK 1810 68 | Leg Assembly LH | 1 | |
| 03 | DK 1810 69 | Leg Assembly RH | 1 | |
| 04 | DK 1810 56 | Outer Tube LH | 1 | |
| 05 | DK 1810 57 | Outer Tube RH | 1 | |
| 06 | DK 1810 70 | Fork Pipe Spinning | 2 | |
| 07 | DK 1810 06 | Socket Headed Bolt - M10 x 1.5 x 35 | 2 | |
| 08 | DK 1810 07 | Copper Washer | 2 | |
| 09 | DK 1810 08 | Flange Bolt - M8 x 1.25 x 45 | 1 | |
| 10 | DK 1810 09 | Cap Oil Lock | 2 | |
| 11 | DK 1810 10 | Seat Pipe | 2 | |
| 12 | DK 1810 11 | Slide Bush | 2 | |
| 13 | DK 1810 12 | Piston Ring | 2 | |
| 14 | DK 1810 13 | Rebound Spring | 2 | |
| 15 | DK 1810 73 | Main Spring | 2 | |
| 16 | DK 1810 15 | Washer | 2 | |
| 17 | DK 1810 71 | Spacer Tube | 2 | |
| 18 | DK 1810 17 | Guide Bush | 2 | |
| 19 | DK 1810 18 | Washer Seal | 2 | |
| 20 | DK 1810 19 | Oil Seal | 2 | |
| 21 | DK 1810 20 | Oil Seal Stopper | 2 | |
| 22 | DK 1810 21 | Inner Dust Seal | 2 | |
| 23 | DK 1810 22 | Bolt Fork | 2 | |
| 24 | DK 1810 23 | ‘O’ Ring | 2 | |
| 25 | DK 1810 24 | Under Bracket Assembly | 1 | |
| 26 | DK 1810 25 | Spring Washer | 2 | |
| 27 | DK 1810 28 | Hex Bolt - M10 x 1.5 x 40 | 2 | |
| 28 | DG 1810 03 | Washer Plain | 1 | |
| 29 | DG 1810 04 | Oil Seal | 1 | |
| 30 | DG 1810 05 | Bearing Cone | 1 | Included In Kit No. : 36 DV00 07 |
| 31 | 56 DK33 Y9 | Upper Bracket | 1 | |
| 32 | DK 1810 40 | Hose Clamp | 1 | |
| 33 | 59040005 | Bolt | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR-220 BS IV |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
