Head Light(V15 - V12 BS IV)
- $0.00
Head Light
(V15 - V12 BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty V15 | Qty V12 | Remarks |
|---|---|---|---|---|---|
| 01 | JH 1812 23 | Head Lamp Bezel | 1 | 1 | |
| 02 | KD BA05 12 | Washer | 6 | 6 | |
| 03 | KB RA42 16 | Screw Tapping Pan Cross | 2 | 2 | |
| 04 | DJ 1612 29 | Clip Nut M5 | 2 | 4 | |
| 05 | YJ H010 07 | Head Assembly Without Bulb & Cap | 1 | – | |
| 05 | YJ H050 01 | Head Assembly Without Bulb & Cap | -- | 1 | |
| 06 | JH 1812 33 | Head Lamp Mounting Bracket Lower | 1 | 1 | |
| 07 | DJ 1810 65 | Clip Nut - M6 | 2 | 2 | |
| 08 | JH 1812 41 | Grommet Fairing Mounting | 4 | 4 | |
| 09 | JH 1812 42 | Collar Fairing Mounting | 2 | 4 | |
| 10 | KA DC06 25 | Bolt Flanged | 2 | 2 | |
| 11 | DJ 1612 29 | Clip Nut - M5 | 4 | 4 | |
| 12 | LB U000 23 | Screw Truss | 4 | 4 | |
| 13 | 39 2141 24 | Washer Non Metallic | 4 | 4 | |
| 14 | LB U000 44 | Screw Truss | 2 | 2 | |
| 15 | JH 1812 15 | Windshield | 1 | 1 | |
| 16 | JG 1812 36 | Well Nut M5 | 2 | 2 | |
| 17 | JZ 1812 06 | Screw M5 | 2 | 2 | |
| 18 | LA E000 40 | Bolt Flange Small | 2 | 2 | |
| 19 | JH 1812 38 | Cover Back Fairing LH | 1 | 1 | |
| 20 | JH 1812 39 | Cover Back Fairing RH | 1 | 1 | |
| 21 | LA D001 65 | Bolt Flanged | 4 | 4 | |
| 22 | YJ H010 01 | Wiring Harness & Cap Headlight | 1 | - | |
| 22 | YJ H050 02 | Wiring Harness & Cap Headlight | - | 1 | |
| 23 | EC 4010 30 | Bulb 60/55W | 1 | - | |
| 24 | JH 1812 71 | Foam Fairing 20X20X6 | 3 | 3 | |
| 25 | DH 1910 37 | Bulb 3W | 2 | - | |
| 26 | LB U000 02 | Screw Truss | – | 2 | |
| 27 | PA 1812 49 | Foam Speedo Flap | – | 4 | |
| 28 | JL 1812 59 | Foam Strip | – | 2 | |
| 29 | JH 1812 62 | Sleeve for Fairing Mounting | – | 2 | |
| 30 | KA DC06 20 | Bolt Flanged | - | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | V15 - V12 BS IV |
| Engine | 150 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
