Sub-part-figure Number | Item Code | Sub Part Name | Disc 125 Drum | Disc 125 Disc | Remarks |
---|---|---|---|---|---|
01 | JN 1810 01 | Wind Shield | 1 | 1 | |
02 | JZ 1812 06 | Screw S.S. | 4 | 4 | |
03 | 39214124 | Non Metallic Washer | 4 | 4 | |
04 | JZ 1810 03 | Well Nut | 4 | 4 | |
05 | JN 1810 10 | Bush-1 for Well Nut | 2 | 2 | |
05 | JN 1810 11 | Bush-2 for Well Nut | 2 | 2 | |
06 | 35161060 | Clip Nut | 5 | 5 | |
07 | 39223801 | Screw M.S. | 2 | 2 | |
08 | JZ 4010 12 | Head Lamp Assly | 1 | 1 | |
09 | 39045411 | Washer Metallic | 6 | 6 | |
10 | 39177802 | Screw Tapping | 2 | 2 | |
11 | JN 1810 05 | Bracket Head Lamp Mounting | 1 | 1 | |
12 | CL 2010 23 | Lamp 12V 35/35W-HS1 | 1 | 1 | |
13 | JZ 1810 04 | Foam on Head Lamp | 6 | 6 | |
14 | JN 1810 19 | Foam | 1 | 1 | |
15 | JZ 4010 15 | Head Lamp Harness Branch | 1 | 1 | |
16 | JN 1810 03 | Bracket Fairing Top | 1 | 1 | |
17 | JN 1810 17 | Bracket Flap Support LH | 1 | 1 | |
18 | JN 1810 18 | Bracket Flap Support RH | 1 | 1 | |
19 | JN 1810 21 | Bolt Flange | 2 | 2 | |
20 | 39194304 | Bolt Flange | 2 | 2 | |
21 | JN 1810 23 | Bracket H/L Mtg Lower LH | 1 | 1 | |
22 | JN 1810 24 | Bracket H/L Mtg Lower RH | 1 | 1 | |
23 | 59010005 | Screw Mushroom Head | 2 | 2 | |
24 | JN 1810 04 | Bracket Cowling | 1 | 1 | |
25 | 39021911 | Washer | 2 | 2 | |
26 | 39206004 | Bolt Hex | 2 | 2 | |
27 | JZ 1812 08 | Bracket Cowling Lower | 1 | 1 | |
28 | 39194304 | Bolt Flange | 2 | 2 | |
29 | 39196104 | Bolt Hex Flange | 1 | 1 | |
30 | 39190701 | Mushroom Head Screw | 3 | 3 | |
31 | 39214124 | Washer Non-Metallic | 4 | 4 | |
32 | 39150811 | Washer for H/L Adjustment Bolt | 2 | 2 | |
33 | 39079815 | Hex Flange Nut | 1 | 1 | |
34 | JN 1810 19 | Foam (N.I.) | 1 | 1 | |
35 | 39150811 | Washer for H/L Adjustment Bolt | 2 | 2 |
Specification | |
Quality | Bajaj Geniune Parts |
Model | Discover BS IV REV 06 Jun 2017 |
Engine | 125 CC |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000