FAIRING & MOUNTING (FOR F)(Pulsar 220 BS3 REV03DEC14)
- $0.00
FAIRING & MOUNTING
(FOR F)
(Pulsar 220 BS3 REV03DEC14)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DK 1613 17 | Faring mtg. structure | 1 | D-48 (Old P. No.52DK0144) |
| 02 | 39195704 | Flange bolt | 2 | |
| 02 | 39195604 | Flange bolt | 2 | |
| 03 | DK 1610 81 | Rubber grommet Fairing mtg. | 4 | |
| 04 | DK 1610 82 | Sleeve Fairing | 1 | |
| 05 | DK 1611 26 | Damper for fairing | 4 | |
| 06 | DK 1610 70 | Fairing air intake LH | 1 | |
| 07 | Dk 1610 71 | Fairing air intake RH | 1 | |
| 08 | DK 1610 72 | Fairing under cover | 1 | |
| 09 | 59020001 | Self tapping screw | 4 | |
| 10 | DK 1610 73 | Fairing back cover assly. | 1 | |
| 11 | 39177802 | Self tapping screw for speedo | 1 | |
| 12 | DJ 1612 29 | Clip nut | 1 | |
| 13 | 39190701 | Screw | 12 | |
| 14 | DK 1611 76 | Fairing mesh LH | 1 | |
| 15 | DK 1610 77 | Fairing mesh RH | 1 | |
| 16 | 39191824 | Washer | 6 | |
| 17 | DK 2210 14 | Mirror assly. LH | 1 | (For F) |
| 17 | DJ 2210 03 | Mirror assly. LH | 1 | (For S) |
| 18 | DK 2210 15 | Mirror assly. RH | 1 | (For F) |
| 18 | DJ 2210 04 | Mirror assly. RH | 1 | (For S) |
| 19 | DK 2210 01 | Nut for mirror | 1 | |
| 20 | 59020001 | Screw (self tapping) | 6 | |
| 21 | DK 1612 10 | Tape | 16 | |
| 22 | JN 1814 06 | Beading | 1 | |
| 23 | DK 1611 52 | Nylon bush for fairing | 2 | |
| 24 | DK 1611 25 | Rubber for mirror | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 220 BS3 REV03DEC14 |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
