Electrical Equipments(PulsarAS-150&NS-150)
- $0.00
Electrical Equipments
(PulsarAS-150&NS-150)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty. 150 NS | Qty. 150 AS | Remarks |
|---|---|---|---|---|---|
| 01 | JF 4022 03 | Harness Wiring | 1 | -- | |
| 01 | JF 4022 09 | Harness Wiring | -- | 1 | |
| 01 | JF 4022 17 | Harness Wiring | -- | 1 | Refer Bulletin 2015-42 |
| 02 | DT 4020 06 | Light Control Module | 1 | 1 | Deleted from 21.10.2015 |
| 03 | 30191048 | Band (123 mm) | 5 | 5 | |
| 04 | 30201064 | Band (149 mm) | 3 | 3 | |
| 05 | JL 4022 01 | Cable Assy Relay To Motor | 1 | 1 | N.I. |
| 06 | JF 4022 01 | Cable Earth | 1 | 1 | N.I. |
| 07 | JD 4022 17 | Band (Length 150 mm) | 2 | 2 | N.I. |
| 08 | PA 4016 00 | Horn | 1 | 1 | |
| 09 | 39150711 | Washer - Plain | 1 | 1 | |
| 10 | 39220504 | Hex Head Bolt - Flanged M8 | 1 | 1 | |
| 11 | JF 1812 53 | Battery Case Assly | 1 | 1 | |
| 12 | JG 4018 08 | Foam Bottom Battery | 12 | 12 | |
| 13 | JF 4018 02 | Battery Band | 1 | 1 | |
| 14 | KA EM06 14 | Bolt - Flanged | 4 | 4 | |
| 14A | JL 1812 64 | Sleeve | 4 | 4 | |
| 15 | JF 4018 03 | 12V 4Ah VRLA Battery | 1 | 1 | |
| 16 | JN 3516 04 | Starter Relay- With Grommet | 1 | 1 | |
| 17 | JL 4022 07 | Fuse Box Assly with Fuse | 1 | 1 | |
| 18 | AP 2010 25 | Fuse 15A (Blade Type) | 2 | 2 | |
| 19 | JD 4022 12 | Band (Length 200 mm) | 1 | 1 | N.I. |
| 20 | PA 4022 04 | Band (Length 110 mm) | 2 | 2 | N.I. |
| 21 | DS 2010 25 | Flasher | -- | 1 | Refer Bulletin 2015-42 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar AS150 & NS 150 06M16 |
| Engine | 150 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
