Tail Lamp Assly / Front Number Plate(PULSAR 135 LS_BS3)
- $0.00
Tail Lamp Assly / Front Number Plate
(PULSAR 135 LS_BS3)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JD 4010 08 | LED Tail Lamp | 1 | |
| 02 | DD 2010 11 | Damper | 2 | For Front No. Plate |
| 03 | DJ 1810 83 | Collar | 2 | For Front No. Plate |
| 04 | 39212415 | Flange Nut | 1 | Reflector Mounting |
| 05 | JD 1138 00 | Bracket Rear No. Plate | 1 | |
| 06 | 39155304 | Bolt Flange | 2 | For Front No. Plate |
| 07 | DP 1611 45 | Number Plate Rear | 1 | |
| 08 | 39247604 | Hex Flanged Bolt | 2 | For Rear No. Plate |
| 09 | DP 1611 44 | Number Plate Front | 1 | |
| 10 | JD 2328 02 | Front No. Plate Mounting Bracket | 1 | |
| 11 | 39178301 | Truss Screw Front No. Plate | 2 | No. Plate Lamp |
| 12 | JD 4010 07 | No. Plate Lamp with 2 Point Coupler | 1 | |
| 13 | DJ 2010 72 | Bulb 12V/ 5W | 1 | Rear No. Plate Lamp |
| 14 | 39217924 | Washer (Non Metallic) | 4 | For LED Tail Lamp |
| 15 | 39152301 | Screw For LED Tail Lamp | 4 | |
| 16 | JD 1138 01 | Bracket Rear Blinker Mounting | 1 | |
| 17 | JD 1138 02 | Bracket Reflector Mounting | 1 | N.I. |
| 18 | DD 2010 02 | Reflector Reflex | 1 | |
| 19 | 39197215 | Nut for Reflex | 1 | |
| 20 | JW 4010 10 | Cap Tail Camp | 1 | N.I. |
| 22 | DJ 1612 29 | Clip Nut Tail Lamp | 4 | |
| 23 | JD 2328 01 | Bracket Number Plate Mounting | 1 | |
| 24 | 39194304 | Bolt | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar LS BS3 REV03JUN16 |
| Engine | 135 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
