Crankcase LH(PULSAR 180 UG_BS IV)
- $0.00
Crankcase LH
(PULSAR 180 UG_BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JC 1010 45 | Crankcase LH | 1 | |
| 02 | 59050008 | Stud | 2 | |
| 03 | DK 1010 94 | Guide Starter Assembly | 1 | |
| 04 | 39218819 | Oil Seal | 1 | |
| 05 | 59210006 | O’ Ring | 1 | |
| 06 | 39075201 | C’ Sunk Head Screw | 3 | |
| 07 | 39260320 | Bearing Ball (for Input Shaft) | 1 | |
| 08 | 59200006 | Bearing Ball (for Output Shaft) | 1 | |
| 09 | 59200028 | Balancer LH Bearing | 1 | |
| 10 | DG 1014 56 | Oil Seal (For Output Shaft) | 1 | |
| 11 | 39219019 | Oil Seal (For Shift Lever) | 1 | |
| 12 | DH 1012 03 | Breather Pipe | 1 | |
| 13 | DH 1017 18 | Rubber Tube | 1 | |
| 14 | DS 1012 34 | Spring Clip | 1 | |
| 15 | DH 1016 61 | Plug Drain Bolt | 1 | |
| 16 | 31101106 | Gasket (For Drain Bolt) | 1 | |
| 17 | DK 1013 80 | Neutral Switch Complete | 1 | |
| 18 | DJ 2011 40 | Cable Assembly (Battery To Earth) | 1 | |
| 19 | 39194004 | Plain Washer | 1 | |
| 20 | 39167704 | Bolt | 8 | |
| 21 | DK 1010 97 | Damper | 1 | |
| 22 | 59200007 | Needle Roller Bearing (30*37*16) | 1 | |
| 23 | KJ AB10 19 | O Ring | 1 | |
| 24 | 39218106 | Hollow Dowel Pin | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 180 UG BS IV |
| Engine | 180 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
