Crankcase LH(Pulsar RS 200 REV14JUN17)
- $0.00
Crankcase LH
(Pulsar RS 200 REV14JUN17)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty ABS | Qty NON ABS | Servicable |
|---|---|---|---|---|---|
| 01 | 36 JL00 94 | Kit Assembly Crankcase LH | 1 | 1 | Refer Kit List |
| 02 | LA E000 14 | Bolt Flanged | 2 | 2 | |
| 03 | DH 1013 81 | Pre Coated pan Screw | 1 | 1 | |
| 04 | JG 5410 63 | Bracket Harness Upper | 1 | 1 | |
| 04 | JU 5410 18 | Bracket Harness Upper | 1 | 1 | |
| 05 | JG 5410 44 | Bracket Harness Lower | 1 | 1 | |
| 06 | 39177304 | Bolt M-5 x 16 | 2 | 2 | |
| 07 | DT 3518 02 | Neutral Indication Switch with | 1 | 1 | Pickup Coil |
| 08 | 39104319 | Seal Oil | 1 | 1 | Gear Change lever |
| 09 | KE BA37 15 | Circlip Internal | 1 | 1 | Output Shaft |
| 10 | DG 1014 56 | Seal Oil | 1 | 1 | Output Shaft |
| 11 | 59200006 | Bearing Ball | 1 | 1 | Output Shaft |
| 12 | JG 5410 15 | Needle Bearing | 1 | 1 | Drum |
| 13 | 39256220 | Needle Bearing | 1 | 1 | |
| 13 | BF 5610 20 | Bearing Plain | 1 | 1 | |
| 14 | JY 5710 30 | Mesh Oil Filter Assembly | 1 | 1 | |
| 14A | LJ A000 04 | ‘O’ Ring Strainer | 1 | 1 | |
| 14A | 59210023 | O - Ring | 1 | 1 | |
| 15 | JA 5410 48 | Strainer Cap with ‘O’ Ring | 1 | 1 | |
| 15 | JA 5410 21 | Cap Strainer | 1 | 1 | |
| 16 | JG 5410 41 | Gasket Crankcase | 1 | 1 | |
| 17 | 36 DT00 08 | Kit Engine Gasket | 1 | 1 | Refer Kit List |
| 18 | JG 5410 58 | Chain Guard | 1 | 1 | |
| 19 | KB BG06 12 | Pan Head Screw | 3 | 3 | |
| 19 | LB B000 07 | Screw Pan Cross M6x1xL12 | 4 | 4 | |
| 20 | JG 5410 43 | Retainer Gear Starter | 1 | 1 | |
| 21 | LA E000 42 | Bolt Flange M6x1xL16 | 1 | 1 | |
| 22 | KA EQ06 40 | Bolt Flange Small M6x1xL40 | 10 | 10 | |
| 23 | LA E000 10 | Bolt Flange M5 x 13L | 2 | 2 | |
| 24 | LA D000 81 | BOLT FLANGED | 4 | 4 | BS IV |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR RS 200 REV14JUN17 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
