Electrical Equipments(PULSAR 220_ BSIV REV)
- $0.00
Electrical Equipments
(PULSAR 220_ BSIV REV)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DK 2010 37 | Horn LH stay | 1 | |
| 02 | DK 2010 38 | Horn RH stay | 1 | |
| 03 | 39150711 | Plain Washer | 1 | |
| 04 | 39195604 | Flange Bolt | 1 | |
| 05 | DK 2011 53 | Wiring Harness | 1 | |
| 5A | DK 2011 59 | Wiring Harness | 1 | AHO Model |
| 06 | 31201079 | Rear Brake Switch | 1 | |
| 07 | DK 1910 14 | Spring Brake Switch | 1 | |
| 08 | DH 2010 19 | Grommet Rear Brake Switch | 1 | |
| 09 | DJ 2012 40 | Battery (12V-9A) MF Wet Charged | 1 | |
| 10 | DJ 1612 47 | Band Battery | 1 | |
| 11 | 39155104 | Flange Bolt | 1 | |
| 12 | DK 2010 78 | Starter Relay / Damper | 1 | |
| 13 | DJ 1810 65 | Clip Nut | 4 | |
| 14 | JC 2010 27 | Cable Assly. (St. Motor to St. Relay) | 1 | |
| 15 | DK 2010 28 | Cable Assembly (Battery to Earth) | 1 | |
| 16 | DK 1110 81 | CDI Non TPS Assembly | 1 | |
| 17 | DK 1611 63 | Bracket Rear Brake Switch | 1 | |
| 18 | JG 4018 08 | Foam Battery Bracket 35 x 15 x 3 | 3 | |
| 19 | DS 2010 25 | Assembly DC Flasher (SS) | 1 | |
| 19A | DT 4020 06 | Light Control Module | 1 | AHO Model |
| 20 | AB 2010 17 | Cap (Battery) | 1 | |
| 21 | DJ 1610 06 | Pad I Battery Bracket | 1 | |
| 22 | DJ 1610 07 | Rubber Pad II Bracket | 2 | |
| 23 | DK 2010 49 | Clamp Harness (Strip Clamp) | 1 | |
| 24 | DH 1011 99 | Stopper Plate (Wiring Harness) | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR-220 BS IV |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
