REAR HUB (For alloy wheel)(PLATINA SPC_02-08-2012)
- $0.00
REAR HUB
(For alloy wheel)
(PLATINA SPC_02-08-2012)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Servicable |
|---|---|---|---|---|
| 01 | 39098815 | Nut Hex. | 1 | |
| 02 | 30151005 | Indicator | 1 | |
| 03 | 36 DZ00 02 | Chain Sprocket Kit | 1 | Ref. Page No. 60 |
| 04 | 39224020 | Bearing Ball | 1 | |
| 05 | DZ 1510 02 | Sleeve | 1 | (For Axel dia15) |
| 05 | DZ 1510 19 | Sleeve | 1 | Drum dia 130mm |
| 05 | JK 1312 02 | Sleeve | 1 | For Black Colour |
| 06 | DU 1510 10 | Coupling | 1 | |
| 07 | DZ 1510 18 | Stud | 4 | |
| 08 | 39080115 | Nut Hex. Fine | 4 | |
| 09 | 31151029 | Lock Washer | 2 | |
| 10 | 36 DU15 06 | Rear Wheel Bearing Kit | 1 | Ref. Page No. 60 |
| 11 | 31151018 | Collar Bearing | 2 | |
| 12 | DX 1510 25 | Coupling Rubber Integral | 4 | Drum Dia. 130 mm |
| 12 | 31151021 | Coupling Rubber Integral | 4 | New part. |
| 13 | 30151069 | Spring | 2 | |
| 14 | 31151008 | Shoe Brake | 1 | |
| 15 | 31151023 | Brake Cam | 1 | |
| 16 | DS 1510 69 | Panel Rear Brake | 1 | JA131205 For Black Colour |
| 16 | JA 1312 05 | Panel Rear Brake | 1 | For 5 Spoke |
| 16 | DZ 1510 16 | Panel Rear Brake | 1 | Drum Dia. 130 mm |
| 17 | DZ 1510 21 | Axle | 1 | JK131201 For Black Colour |
| 18 | DZ 1510 04 | Collar | 1 | JK131204 For Black Colour |
| 18 | DZ 1510 20 | Collar | 1 | For 5 Spoke |
| 19 | 39071411 | Washer Plain | 1 | |
| 20 | DH 1710 19 | 'U' nut Swing Arm | 1 | |
| 21 | 30151038 | Ring O | 1 | |
| 22 | DZ 1510 20 | Collar | 1 | |
| 23 | 39079815 | Hex Nut | 1 | |
| 24 | 31151037 | Lever Brake | 1 | JB131605 For Black Colour |
| 25 | 39078708 | Pin Cotter | 1 | |
| 25 | 39080708 | Pin Cotter | 1 | For 5 Spoke |
| 26 | 39079815 | Hex. nut | 1 | |
| 27 | DX 1510 81 | Chain lock set | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Platina SPC 02-08-2012 |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
