Rear Hub(PULSAR 135 LS_BS3)
- $0.00
Rear Hub
(PULSAR 135 LS_BS3)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | DX 1510 81 | Drive Chain Lock | 1 | |
| 01 | JD 1410 03 | Drive Chain Lock | 1 | From 18.06.2010 |
| 02 | 36 JE00 07 | Chain Sprocket kit | 1 | Refer Page No.105 |
| 02 | 36 JE00 14 | Chain Sprocket kit | 1 | From 18.06.2010 |
| 03 | 39080115 | Nut | 1 | |
| 04 | LD B000 01 | Plain washer | 1 | |
| 05 | DS 1510 61 | Collar Assly. | 1 | JD131210 From 18.06.2010 |
| 06 | 39224020 | Bearing ball | 1 | |
| 07 | DS 1510 68 | Coupling | 1 | |
| 07 | JG 1312 19 | Coupling | 1 | From 15.11.2011 |
| 08 | DS 1510 73 | Stud M-10 | 4 | |
| 09 | 39079415 | Hex. lock nut | 4 | |
| 10 | DS 1510 74 | Washer | 2 | |
| 11 | DX 1510 22 | Sleeve | 1 | |
| 12 | 39268620 | Bearing Ball | 1 | |
| 13 | 30151075 | Collar Bearing | 1 | |
| 14 | DJ 1510 88 | Damper | 1 | |
| 15 | 39268720 | Bearing Ball | 1 | |
| 16 | 30151069 | Spring | 2 | |
| 17 | 30151105 | Shoe Brake Assly | 2 | |
| 18 | DJ 1510 92 | Panel Rear Brake | 1 | |
| 19 | 30151011 | Cam Brake | 1 | |
| 19 | 39072211 | Plain Washer | 1 | |
| 20 | 30151038 | Ring ‘O’ | 1 | |
| 21 | 30151005 | Indicator | 1 | |
| 22 | JD 1316 01 | Lever Brake | 1 | |
| 23 | 39244704 | Bolt | 1 | |
| 24 | JN 1312 11 | Axle | 1 | |
| 25 | DJ 1510 33 | Collar | 1 | |
| 25 | JD 1312 12 | Collar | 1 | From 18.06.2010 |
| 26 | LD B000 02 | Plain washer | 1 | |
| 27 | DJ 1710 33 | ‘U’ nut | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar LS BS3 REV03JUN16 |
| Engine | 135 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
