Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
---|---|---|---|---|
01 | JD 1510 15 | Upper Bracket | 1 | |
01 | JD 1510 54 | Upper Bracket (Black) | 1 | From Dec 2011 |
02 | JD 1510 17 | Holder Handle RH | 1 | |
02 | JD 1510 52 | Holder Handle RH (Black) | 1 | From Dec 2011 |
03 | JD 1510 16 | Holder Handle LH | 1 | |
03 | JD 1510 51 | Holder Handle LH (Black) | 1 | From Dec 2011 |
04 | DG 1810 08 | Socket Bolt | 4 | |
05 | JF 4014 00 | Control Switch LH | 1 | |
06 | JF 4014 01 | Control Switch RH | 1 | |
07 | DJ 1910 54 | Holder LH | 1 | |
08 | DJ 1910 55 | Lever LH | 1 | |
08 | DJ 1910 83 | Lever LH | 1 | From 26.11.2011 |
08 | DJ 1910 82 | Lever & Holder Assly | 1 | From 26.11.2011 |
09 | DL 1910 14 | Stud Lever Handle | 1 | |
10 | 30191017 | Self Locking Nut | 1 | |
11 | DD 1911 47 | Adjusting Screw | 1 | |
12 | DH 1910 07 | Grip LH | 1 | |
13 | DH 1910 08 | Grip assly. RH | 1 | |
14 | DS 1910 52 | Boot for lever LH | 1 | |
15 | DH 1810 22 | Handle bar weight | 2 | |
16 | 39242704 | Hex. Soc. Hd. Cap Screw | 2 | |
17 | DS 1910 52 | Lever Boot for Clutch Switch | 1 | N.I. |
18 | JB 4014 02 | Switch Assly. Ignition | 1 | |
19 | 38194304 | Flange Bolt | 2 | |
20 | DK 1810 31 | Bush Silent Handle Bar Tube | 2 | |
21 | DJ 2011 95 | Clutch Switch | 1 | |
21 | DJ 2012 46 | Clutch Switch (Vertical Base) | 1 | From 26.11.2012 |
22 | JD 1510 34 | Handle bar tube assly. LH | 1 | |
23 | JD 1510 35 | Handle bar tube assly. RH | 1 | |
24 | DH 1910 17 | Pipe throttle | 1 | N.I. |
25 | JW 2326 01 | Lock set 4 in 1 | 1 | |
26 | DK 1810 58 | Bolt | 2 | |
27 | 39118011 | Washer | 2 | |
28 | JD 1510 32 | Rubber Plug | 2 | |
29 | JD 2316 00 | Mirror Assly. LH | 1 | |
30 | JD 2316 01 | Mirror Assly. RH | 1 |
Specification | |
Quality | Bajaj Geniune Parts |
Model | Pulsar LS BS3 REV03JUN16 |
Engine | 135 CC |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000