Handle Bar Assembly(Pulsar 135 UG + BS)
- $0.00
Handle Bar Assembly
(Pulsar 135 UG + BS)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JD 1510 54 | Upper Bracket | 1 | |
| 02 | JD 1510 52 | Holder Handle RH | 1 | |
| 03 | JD 1510 51 | Holder Handle LH | 1 | |
| 04 | DG 1810 08 | Socket Bolt | 4 | |
| 05 | JF 4014 00 | Control Switch LH | 1 | |
| 06 | JF 4014 01 | Control Switch RH | 1 | |
| 06A | JD 4014 00 | Control Switch RH | 1 | AHO Model |
| 07 | DJ 1910 54 | Holder LH | 1 | |
| 08 | DJ 1910 55 | Lever LH | 1 | |
| 09 | DL 1910 14 | Stud Lever Handle | 1 | |
| 10 | 30191017 | Self Locking Nut | 1 | |
| 11 | 36 DU19 01 | Adjusting Screw | 1 | |
| 12 | DH 1910 07 | Grip LH | 1 | |
| 13 | DH 1910 08 | Grip Assembly RH | 1 | |
| 14 | DS 1910 52 | Boot for lever LH | 1 | |
| 15 | DH 1810 22 | Handle bar weight | 2 | |
| 16 | 39242704 | Hex. Soc. Hd. Cap Screw | 2 | |
| 17 | DS 1910 52 | Lever Boot for Clutch Switch | 1 | |
| 18 | JB 4014 02 | Switch Assembly Ignition | 1 | |
| 19 | 39194304 | Flange Bolt | 2 | |
| 20 | DK 1810 31 | Bush Silent Handle Bar Tube | 2 | |
| 21 | DJ 2011 95 | Clutch Switch | 1 | |
| 22 | JD 1510 45 | Handle bar tube Assembly LH | 1 | |
| 23 | JD 1510 48 | Handle bar tube Assembly RH | 1 | |
| 24 | DH 1910 17 | Pipe throttle | 1 | N.I. |
| 25 | JW 2326 01 | Lock set 4 in 1 | 1 | |
| 25 | 52 JD06 43 | Lock Set + Tank Cap BS IV | 1 | BS IV |
| 26 | DK 1810 79 | Bolt Handle Bar Tube | 2 | |
| 27 | 39118011 | Washer | 2 | |
| 28 | JD 1510 32 | Rubber Plug | 2 | |
| 29 | JD 2316 00 | Mirror Assembly LH | 1 | |
| 30 | JD 2316 01 | Mirror Assembly RH | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Pulsar 135 UG + BSIV |
| Engine | 135 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
