MAGNETO / C.D.I. / H.T. COIL(Pulsar 220 BS3 REV03DEC14)
- $0.00
MAGNETO / C.D.I. / H.T. COIL
(Pulsar 220 BS3 REV03DEC14)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | PD 3510 01 | Stator assly. Comp. (For F) | 1 | D-48 (Old P. No. JC111026) |
| 01 | DH 1110 81 | Stator assly. comp. | 1 | (For S) |
| 02 | JC 1110 28 | Rotor Assly. | 1 | (For F) |
| 02 | DH 1110 83 | Rotor Assly. | 1 | (For S) |
| 03 | 39167404 | Hex. Bolt with Flange | 2 | |
| 04 | 39076101 | Pan Head Screw | 2 | |
| 05 | DK 1110 28 | Spark Plug | 2 | |
| 06 | DH 1011 13 | Grommet Spark Plug | 2 | |
| 07 | JC 1110 22 | H.T. Coil LH | 1 | |
| 08 | JC 1110 23 | H.T. Coil RH | 1 | |
| 09 | DH 1110 15 | Cap Spark Plug | 2 | |
| 10 | DD 1110 12 | Grommet H.T. Cable | 2 | |
| 11 | DK 1110 72 | CDI Unit | 1 | |
| 12 | DK 2011 39 | Regulator Voltage (For F) | 1 | D-48 (Old P. No.DK201001 |
| 12 | DJ 2012 02 | Regulator Voltage | 1 | (For S) |
| 13 | 39195504 | Flange Bolt | 1 | D-48-17.08.2012 |
| 14 | 39190204 | Flange Bolt | 2 | |
| 15 | DJ 1610 67 | Bracket H.T. Coil | 1 | |
| 16 | 39168004 | Flange Bolt | 2 | |
| 17 | DH 1110 16 | Grommet Sleeve Spark Plug | 1 | |
| 18 | DK 1012 84 | Hex bolt stator mounting | 3 | |
| 19 | DH 1013 81 | Pan head screw (Pick up coil mtg) | 2 | |
| 20 | JC 1110 07 | Motor assly. starter | 1 | |
| 21 | DS 1013 53 | Bolt STARTER MOTOR SERVICEABLE | 2 | |
| A | DK 1110 16 | Armature | 1 | |
| B | DK 1110 21 | Tie Bolt | 1 | |
| C | JC 1110 10 | Yoke STARTER MOTOR KIT | 1 | |
| D | 36 DK00 50 | Starter Motor Repair kit | 1 | Refer page no. 69 |
| E | 36 DK00 51 | Starter Motor Repair kit | 1 | Refer page no. 69 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR 220 BS3 REV03DEC14 |
| Engine | 220 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
