Front Master Cylinder(PULSAR NS 200 ABS & AS 200 SPC)
- $0.00
Front Master Cylinder
(PULSAR NS 200 ABS & AS 200 SPC)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty 200 NS | Qty 200 AS | Remarks |
|---|---|---|---|---|---|
| 01 | DJ 1910 57 | Lever Front Brake | 1 | -- | |
| 01 | JG 1610 10 | Lever Front Brake | 1 | -- | For ABS Model |
| 01 | JG 1610 10 | Lever Front Brake | -- | 1 | |
| 02 | DJ 1910 29 | Bolt Front Bracket l | 1 | 1 | |
| 03 | DJ 1910 30 | Nut | 1 | 1 | |
| 04 | 36 Dh19 02 | Oil Window Kit | 1 | 1 | |
| 05 | DJ 1910 31 | Screw | 2 | 2 | |
| 06 | DE 1910 29 | Cover - Reservoir | 1 | 1 | |
| 07 | DE 1910 28 | Diaphragm | 1 | 1 | |
| 08 | DJ 1910 56 | Master Cylinder with lever | 1 | -- | |
| 08 | JL 1319 18 | Master Cylinder with lever | -- | 1 | |
| 08 | JF 1318 16 | Master Cylinder with Lever | 1 | -- | For ABS model |
| 09 | DJ 2011 00 | Brake Switch | 1 | 1 | |
| 09 | 36 DT00 36 | Kit Switch Front M Cylinder | 1 | -- | For ABS model |
| 10 | DE 1910 10 | Washer - Copper | 4 | 4 | |
| 11 | DK 1510 69 | Banjo Bolt | 2 | 2 | |
| 12 | JL 1318 02 | Hose Assembly | 1 | 1 | |
| 12 | JL 1319 19 | Hose Assembly Front Brake | 1 | - | Model BS IV |
| 12 | 36 JL01 41 | Hose M Cylinder to ABS Unit | 1 | - | For ABS model |
| 13 | LA D000 37 | Bolt Flanged M8X1X50 | 2 | 2 | |
| 13 | KA DD08 30 | Bolt Flanged | 2 | - | Model BS IV |
| 14 | DJ 1910 23 | Major Kit M-11 | 1 | 1 | |
| 14 | 36 DT00 34 | Major Kit M Cylinder | 1 | -- | For ABS model |
| 15 | DE 1910 33 | Clamp - Holder : RH | 1 | 1 | |
| 15 | 36 JF00 81 | Kit Clamp RH | 1 | -- | For ABS model |
| 16 | JL 1138 35 | Hose Clamp | -- | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | PULSAR NS 200 ABS & AS 200 |
| Engine | 200 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
