Electrical Equipment(V15 - V12 BS IV)
- $0.00
Electrical Equipment
(V15 - V12 BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty V15 | Qty V12 | Remarks |
|---|---|---|---|---|---|
| 01 | PA 4016 00 | Horn | 1 | 1 | Not Supplied in Spare |
| 02 | KA DD08 12 | Bolt Flange | 1 | 1 | |
| 03 | JN 3516 04 | Starter Relay with Grommet | 1 | 1 | |
| 04 | JF 4018 03 | Battery 4AH VRLA Wet (K11) | 1 | 1 | |
| 05 | JH 4018 00 | Band Battery | 1 | 1 | |
| 05 | JV 4018 02 | Band Battery | 1 | 1 | For BS IV Model |
| 06 | JZ 4018 09 | Foam For Battery Base | 1 | 1 | |
| 07 | JH 4022 00 | Wiring Harness | 1 | -- | |
| 07 | JH 4022 07 | Wiring Harness | -- | 1 | |
| 07 | JH 4022 11 | Wiring Harness | 1 | -- | AHO Model |
| 07 | JH 4022 27 | Wiring Harness | -- | 1 | AHO Model |
| 08 | JZ 4022 18 | Tie Band | 4 | 4 | |
| 09 | 60 1114 15 | Clip | 4 | – | |
| 10 | DJ 2012 19 | Fuse Box Assembly | 1 | 1 | |
| 11 | 60 1115 34 | Fuse 15A | 2 | 2 | |
| 12 | JD 4022 17 | Tie Band | 9 | 9 | |
| 13 | DS 2010 25 | Flasher | 1 | 1 | |
| 13A | DT 4020 06 | Light Control Module | 1 | -- | AHO Model |
| 13B | JL 4020 04 | Light Control Module | -- | 1 | AHO Model |
| 14 | DS 1910 07 | Spring Brake Switch | 1 | 1 | |
| 15 | JL 4014 06 | Rear Brake Switch | 1 | 1 | |
| 16 | JH 4022 01 | Cable Assembly (Battery to Earth) | 1 | 1 | |
| 17 | JH 4022 02 | Cable Assly. (Motor to Starter Relay) | 1 | 1 | |
| 18 | DL 1910 20 | Bulb Number Plate Lamp | 1 | 1 | |
| 19A | YJ H010 08 | Tail Lamp without Bezel - V15 | 1 | 1 | |
| 19B | YJ H010 09 | Bezel Tail Lamp - V15 | 1 | 1 | |
| 22 | JH 1138 02 | Clamp For Pipe | 1 | 1 | For BS IV Model |
| 23 | KA DF06 08 | Bolt Flanged | 1 | 1 | For BS IV Model |
| 24 | GF 1611 31 | Foam Strip | 7 | 7 | |
| 25 | 60 1114 20 | Cable Tie Lock | 4 | 4 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | V15 - V12 BS IV |
| Engine | 150 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
