Electrical Equipments(Dominor 400)
- $0.00
Electrical Equipments
(Dominor 400)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty ABS | Qty NON-ABS | Remarks |
|---|---|---|---|---|---|
| 01 | JF 4022 35 | Harness Wiring - Non ABS | - | 1 | |
| 01 | JF 4022 45 | Harness Wiring - ABS | 1 | - | |
| 02 | JL 4030 00 | Relay | 4 | 4 | |
| 03 | 36 DT00 04 | Kit Band Wiring Harness | 1 | 1 | Refer Kit List |
| 04 | JG 4020 02 | DC Flasher | 1 | 1 | |
| 05 | JF 4022 12 | Cable Assy Relay To Motor | 1 | 1 | N.I. |
| 06 | JF 4022 11 | Cable Earth | 1 | 1 | N.I. |
| 07 | JL 4032 00 | Termination Unit | 1 | 1 | |
| 08 | PA 4016 00 | Horn - 82 DIA | 1 | 1 | |
| 09 | LD B000 73 | Washer - Plain | 1 | 1 | |
| 10 | KA DA08 14 | Hex Head Bolt - Flanged M8 | 1 | 1 | |
| 11 | JN 3516 04 | Starter Relay - With Grommet | 1 | 1 | |
| 12A | DT 4022 26 | Fuse - 7.5A | 5 | 5 | Not Illustrated |
| 12B | JG 4022 29 | Fuse 15A | 4 | 4 | Not Illustrated |
| 12C | JG 4022 30 | Fuse 30A | 2 | 2 | Not Illustrated |
| 13A | JG 4022 28 | Fuse 10A | 2 | -- | Not Illustrated |
| 13B | JG 4022 34 | Fuse 25A | 1 | -- | Not Illustrated |
| 14 | DT 1138 51 | Bracket Fuse Box Mtg Loose | 1 | -- | |
| 14 | DT 1138 25 | Bracket Fuse Box Mtg Loose | -- | 1 | |
| 15 | JY 4036 04 | Roll Over Sensor | 1 | 1 | |
| 16 | JF 1138 42 | Bracket Roll Over Sensor | 1 | 1 | |
| 17 | KA CF06 12 | Bolt Socket | 2 | 2 | M6 x 1 x L12 |
| 18 | LA C000 08 | Screw Truss | 2 | 2 | M6 x 1 x L25 |
| 19 | LD B000 72 | Plain Washer | 2 | 2 | |
| 20 | KC GC06 06 | Nut Hex Flanged | 2 | 2 | |
| 21 | 36 JU00 15 | 12V 8Ah VRLA Battery | 1 | 1 | |
| 22 | JF 1812 73 | Assembly Battery Case | 1 | 1 | |
| 23 | JF 1813 08 | Rubber Battery Case | 1 | 1 | |
| 24 | KA ED06 22 | Bolt Flanged Small Length | 2 | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Dominor 400 |
| Engine | 400 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
