HANDLE BAR(XCD 125 CC)
- $0.00
HANDLE BAR
(XCD 125 CC)
| Sub-part-figure Number | Item Code | Sub Part Name | Qty ES | Qty KS | Remarks |
|---|---|---|---|---|---|
| 01 | DS 1810 44 | Handle | 1 | 1 | |
| 02 | 39258204 | Flanged bolt | 4 | 4 | |
| 03 | JB 4014 00 | Control switch LH | 1 | 1 | |
| 04 | JB 4014 01 | Control switch RH | 1 | -- | |
| 04 | JB 4014 04 | Control switch RH | -- | 1 | |
| 05 | DJ 1910 53 | Holder Assly. LH | 1 | 1 | |
| 06 | DS 1910 38 | Holder Assly. RH | 1 | 1 | |
| 07 | DJ 1910 55 | Lever grip Left | 1 | -- | |
| 07 | DL 1910 13 | Lever grip Left | -- | 1 | |
| 08 | 29201117 | Front Brake Switch | 1 | 1 | |
| 09 | DD 1911 42 | Lever Brake RH | 1 | 1 | |
| 10 | DS 1810 08 | Damper handle upper | 2 | 2 | |
| 11 | DS 1810 09 | Damper handle lower | 2 | 2 | |
| 12 | DS 1810 10 | Washer handle lower | 2 | 2 | |
| 13 | 39042215 | Nylock Nut | 2 | 2 | |
| 14 | DS 1910 15 | Grip LH | 1 | 1 | |
| 15 | DS 1910 16 | Grip RH | 1 | 1 | |
| 16 | DS 1910 52 | Boot for lever LH | 1 | 1 | |
| 17 | DH 1810 22 | Handle bar weight | 2 | 2 | |
| 18 | 39242704 | Hex. soc. head cap screw | 2 | 2 | |
| 19 | JB 4014 05 | Clutch Switch | 1 | 1 | |
| 20 | DJ 2210 03 | Mirror assly. LH | 1 | 1 | |
| 21 | DJ 2210 04 | Mirror assly. RH | 1 | 1 | |
| 22 | 30191048 | Band | 2 | 2 | |
| 23 | JB 4014 02 | Switch assly. ignition | 1 | 1 | |
| 24 | 39194304 | Flange bolt | 2 | 2 | |
| 25 | JB 1510 03 | Holder Fork Upper | 1 | 1 | |
| 26 | DS 1810 07 | Washer handle Upper | 2 | 2 | |
| 27 | DS 1910 18 | Boot For Lever RH | 1 | 1 | |
| 28 | DS 1810 06 | Holder Up | 2 | 2 | |
| 29 | DS 1810 19 | Holder lower | 2 | 2 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | XCD 125 CC |
| Engine | 125 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
