CYLINDER HEAD(RE 600)
- $0.00
CYLINDER HEAD
(RE 600)
| Sub-part-figure Number | Item Code | Sub Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | BA 1020 11 | Cylinder head complete | 1 | |
| 01a | BB 1010 87 | Cylinder head complete | 1 | for BSIII |
| 02 | 39156806 | Spring dowel sleeve | 1 | |
| 03 | BA 1020 21 | Guide Inlet valve | 1 | |
| 04 | BA 1020 23 | Guide Exhaust valve | 1 | |
| 05 | 39226405 | Stud | 2 | |
| 06 | BA 1020 14 | Valve (Inlet) | 1 | |
| 07 | BA 1020 17 | Valve (Exhaust) | 1 | |
| 08 | BA 1020 19 | Valve Spring | 2 | |
| 09 | BA 1020 20 | Retainer Valve Spring | 2 | |
| 10 | BA 1020 22 | Collet Valve Spring | 4 | |
| 11 | BA 1020 24 | Seal Valve Stem | 1 | |
| 11a | BB 1010 90 | Seal Valve Stem | 1 | for BSIII |
| 12 | BA 1022 70 | Head bolt | 4 | |
| 13 | BA 1020 16 | Gasket Cylinder Head | 1 | |
| 13a | BB 1010 91 | Gasket Cylinder Head | 1 | for BSIII |
| 14 | BA 1110 17 | Glow Plug | 1 | |
| 14a | BB 1110 09 | Glow Plug | 1 | for BSIII |
| 15 | BA 1110 06 | Cord, Glow Plug | 1 | |
| 16 | 39156015 | Flange nut | 1 | |
| 16a | BA 1020 25 | Seat - valve (INLET) | 1 | |
| 16b | BA 1020 26 | Seat - valve (EXHAUST) | 1 | |
| 17 | 39037511 | Plain washer | 1 | |
| 18 | BA 2010 06 | Clamp | 1 | |
| 19 | 39089704 | Bolt | 1 | |
| 20 | BA 1020 27 | Pipe joint | 1 | |
| 21 | BA 1022 65 | Bracket D'com | 1 | |
| 22 | 39106204 | Bolt flanged small | 2 | |
| 23 | BA 1022 77 | Adjuster with nut | 1 | |
| 24 | 16201055 | Spring stop switch | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | RE 600 |
| Engine | 600 |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
