Sub-part-figure Number | Item Code | Sub Part Name | Qty. AA | Qty. AF | Qty. AM | Qty. AZ | Qty. RA | Qty. AN | Servicable |
---|---|---|---|---|---|---|---|---|---|
01 | 24171179 | Tralling arm assly LH | 1 | 1 | 1 | - | - | - | |
02 | 24171180 | Trailing arm assly RH | 1 | 1 | 1 | - | - | - | |
03 | AA171006 | Bush-silent for trailing arm | 2 | 2 | 2 | - | - | - | |
04 | AA171022 | Distance piece assly | 2 | 2 | 2 | - | - | - | |
04a | AA171024 | Spacer ring-dist.piece | 4 | 4 | 4 | - | - | -- | |
05 | AA171011 | Pivot pin trailing arm | 2 | 2 | 2 | - | - | - | |
06 | 39026912 | Spring washer | 2 | 2 | 2 | - | - | - | |
07 | KCAD1411 | Nut | 2 | 2 | 2 | - | - | - | |
08 | 24171094 | Rear shock absorber assly | 2 | 2 | 2 | - | - | - | |
09 | 24170508 | Rear suspension spring | 2 | 2 | 2 | - | - | - | |
10 | 24170505 | Cup washer top side | 4 | 4 | 4 | - | - | - | |
11 | 24171055 | Rubber bush - cup washer | 4 | 4 | 4 | - | - | - | |
12 | 39030315 | Hex nut | 4 | 4 | 4 | - | - | - | O |
12 | KCAD1008 | Nut hex thick | 2 | 2 | 2 | - | - | - | |
12a | KCBD1006 | Nut hex thin | 2 | 2 | 2 | - | - | - | |
13 | 24170507 | Bolt flange guiding m12x1.25 | 2 | 2 | 2 | - | - | -- | |
14 | 24171049 | Mounting rubber sleeve | 2 | 2 | 2 | - | - | - | O |
14 | 24171197 | Mounting rubber sleeve | 2 | 2 | 2 | - | - | - | |
15 | 39026912 | Sprinhg washer | 2 | 2 | 2 | - | - | - | |
16 | 39260715 | Nut | 2 | 2 | 2 | - | - | - | |
17 | 24171024 | Seal 41x60x7 | 2 | 2 | 2 | - | - | - | |
18 | 01100342 | Bearing 30X55X13-Rear Hub | 2 | 2 | 2 | - | - | - | |
19 | 59200012 | Bearing - needle (SL 35 20 ) | 2 | 2 | 2 | - | - | - | |
20 | 22171007 | Seal - oil | 2 | 2 | 2 | - | - | - | |
21 | 39034217 | Internal circlip | 1 | 1 | 1 | - | - | - |
Specification | |
Quality | Bajaj Geniune Parts |
Model | RE 4S FL RL - BSIII |
Engine | RE 4S FL RL - BSIII |
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
+91 9970880000