HANDLE BAR(Avenger DTS-i 200cc)
- $0.00
HANDLE BAR
(Avenger DTS-i 200cc)
| Sub-part-figure Number | Item Code | Sub-Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | JM 1810 08 | Handle | 1 | |
| 02 | DV 1810 03 | Weight, Handle | 2 | |
| 03 | DG 1910 80 | Holder Clutch Lever | 1 | |
| 04 | DG 1810 69 | Plate | 1 | |
| 05 | DG 1810 81 | Bracket speedometer | 1 | |
| 06 | DG 1810 67 | Holder Handle Upper | 1 | |
| 07 | DG 1810 70 | Holder Handle Lower LH | 1 | |
| 08 | DG 1810 71 | Holder Handle Lower RH | 1 | |
| 09 | DH 1910 08 | Grip RH | 1 | |
| 10 | DH 1910 07 | Grip LH | 1 | |
| 11 | DG 1910 10 | Lever Assly. Grip Clutch LH | 1 | |
| 12 | DV 2010 04 | Housing Assly. Control RH | 1 | |
| 13 | JM 2210 01 | Mirror Assly LH | 1 | |
| 14 | JM 2210 02 | Mirror Assly RH | 1 | |
| 15 | DG 1910 13 | Bolt Clutch Lever | 1 | |
| 16 | 30191024 | Screw cable Adjust | 1 | |
| 17 | 39242704 | Allen bolt | 2 | |
| 18 | DG 1910 14 | Nut Lock | 1 | |
| 19 | 30191017 | Nut Cable Adjust Lock | 1 | |
| 20 | DG 1810 87 | Nut Cap | 2 | |
| 21 | DG 1810 54 | Damper | 4 | |
| 22 | 39199304 | Bolt Upset | 1 | |
| 23 | 39195304 | Bolt Flanged small | 2 | |
| 24 | 39195204 | Bolt Flanged small | 4 | |
| 25 | 39199501 | Screw CSK Cross | 2 | |
| 26 | 39150611 | Washer Plain small | 1 | |
| 27 | 39078912 | Washer spring | 2 | |
| 28 | JM 2010 03 | Housing Assly. Control LH | 1 | |
| 29 | DG 1910 15 | Lever Grip LH | 1 | |
| 30 | DG 2010 30 | Clutch switch | 1 | N.I. |
| Specification:Quality | |
| Bajaj Geniune Parts;Model | Avenger DTS-i 200cc;Engine |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
