FRONT FORK(Avenger DTS-i 200cc)
- $0.00
FRONT FORK
(Avenger DTS-i 200cc)
| Sub-part-figure Number | Item Code | Sub-Part Name | Quantity | Remarks |
|---|---|---|---|---|
| 01 | 39195004 | Bolt Flanged small | 2 | |
| 02 | DG 1810 34 | Grommet, Hose Clamp | 2 | |
| 03 | DG 1810 12 | Pipe - Left Fork Outer | 1 | |
| 04 | DG 1810 89 | Pipe - Right Fork Outer | 1 | |
| 05 | DV 1810 10 | Pipe, Fork Inner | 2 | |
| 06 | DG 1810 14 | Spring Front Fork | 2 | |
| 07 | DG 1810 15 | Seat Fork Spring | 2 | |
| 08 | DG 1810 93 | Cover Fork | 1 | |
| 09 | DG 1810 95 | Holder Fork Under | 1 | |
| 10 | DG 1810 91 | Holder Fork Upper | 1 | |
| 11 | DG 1810 22 | Ring, Oil Seal Stopper | 2 | |
| 12 | 39194304 | Bolt Flange | 3 | |
| 13 | DG 1810 11 | Bushing - Front Fork, Inner Pipe | 2 | |
| 14 | DG 1810 13 | Bushing - Front Fork, Outer Tube | 2 | |
| 15 | DV 1810 01 | Fork Front | 1 | Includes Sr.No. 10,11,38 & 39 |
| 16 | DG 1810 27 | Bolt, Fork Cylinder | 2 | |
| 17 | DG 1810 85 | Nut, Cap | 2 | |
| 18 | DG 1810 03 | Washer | 1 | |
| 19 | DG 1810 24 | Spacer | 2 | |
| 20 | DG 1810 05 | Race, Steering Stem Bearing | 1 | |
| 21 | DG 1810 23 | Seal Oil, Fork Outer Tube | 2 | |
| 22 | DG 1810 26 | Ring 'O' Fork Top | 2 | |
| 23 | DG 1810 04 | Seal Oil, Steering Stem | 1 | |
| 24 | DG 1810 21 | Seal, Fork Outer Tube | 2 | |
| 25 | DG 1810 88 | Damper Assly. RH | 1 | |
| 26 | DG 1810 09 | Damper Assly. LH | 1 | |
| 27 | DG 1810 36 | Bolt | 4 | |
| 28 | DG 1810 06 | Bolt Socket | 2 | |
| 29 | DG 1810 08 | Bolt | 2 | |
| 30 | DG 1810 44 | Bolt Fork Top | 2 | |
| 31 | DP 1611 44 | Plate Number Front | 1 | |
| 32 | DG 1810 37 | Clamp for cable (Top) | 2 | |
| 33 | DG 1810 40 | Clamp brake hose | 1 | |
| 34 | DG 1810 41 | Clamp speedo cable | 1 |
| Specification:Quality | |
| Bajaj Geniune Parts;Model | Avenger DTS-i 200cc;Engine |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
