CARBURETTOR (Ucal)(RE 4 Stroke Autoriksha)
- $0.00
CARBURETTOR
(Ucal)
(RE 4 Stroke Autoriksha)
| Sub-part-figure Number | Item Code | Sub Part Name | QTY. AA | QTY. AF | QTY. AM | Remarks |
|---|---|---|---|---|---|---|
| 01 | AA 1210 97 | Carburettor comp. | 1 | -- | -- | Flange type |
| 02 | 24121069 | Pin float | 1 | -- | -- | |
| 03 | 16121138 | Needle assly | 1 | -- | -- | |
| 04 | AA 1211 05 | Jet pilot | 1 | -- | -- | |
| 05 | 24121361 | Seal | 1 | -- | -- | |
| 06 | 31121080 | 'O' ring | 1 | -- | -- | |
| 07 | 24121362 | Piston valve | 1 | -- | -- | |
| 08 | DD 1210 47 | Spring throttle valve | 1 | -- | -- | |
| 09 | 24121364 | Mixing Cap assly. | 1 | -- | -- | |
| 10 | 24121365 | Float | 1 | -- | -- | |
| 11 | AA 1211 04 | Main jet | 1 | -- | -- | |
| 12 | 24121368 | Needle jet | 1 | -- | -- | |
| 13 | GH 1210 21 | Spring idle adjst. | 1 | -- | -- | |
| 14 | 24121369 | Adjuster | 1 | -- | -- | |
| 15 | 24121370 | Ring | 1 | -- | -- | |
| 16 | DD 1210 52 | Washer | 1 | -- | -- | |
| 17 | DP 1210 53 | Jet needle | 1 | -- | -- | |
| 18 | CB 1210 46 | Screw | 3 | -- | -- | |
| 19 | 24121374 | Bracket | 1 | -- | -- | |
| 20 | 24121375 | Spring | 1 | -- | -- | |
| 21 | AA 1211 06 | Hose | 1 | -- | -- | |
| 22 | DD 1210 89 | Spring | 1 | -- | -- | |
| 23 | 16121032 | Washer | 1 | -- | -- | |
| 24 | 24121062 | 'O' ring | 1 | -- | -- | |
| 25 | 24121381 | Screw | 1 | -- | -- | |
| 26 | 24121383 | Hose clip | 1 | -- | -- | |
| 27 | 24121086 | Screw drain | 1 | -- | -- | |
| 28 | 24121384 | Guide cable assly | 1 | -- | -- | |
| 29 | 24121404 | Body carburettor ucal | 1 | -- | -- | |
| 30 | AA 1211 03 | Screw air | 1 | -- | -- |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | BAJAJ RE 4S |
| Engine | BAJAJ RE 4S |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
