Carburettor(DISCOVER_100_SPC (4G & 5G))
- $0.00
Carburettor
(DISCOVER_100_SPC
(4G & 5G))
| Sub-part-figure Number | Item Code | Sub Part Name | KS Drum | ES Drum | Remarks |
|---|---|---|---|---|---|
| 01 | JB 5812 54 | Carburettor assly. | 1 | 1 | |
| 01 | JB 5812 78 | Carburettor assly. | 1 | 1 | From 01.01.2011 |
| 01 | JB 5812 84 | Carburettor assly. | -- | 1 | NP-22-30/04/12 (4 Speed) |
| 02 | JB 5812 37 | Adjuster throttle cable | 1 | 1 | |
| 03 | JB 5812 38 | Nut adjuster | 1 | 1 | |
| 04 | 36 PA00 12 | Air screw Kit | 1 | 1 | Refer Page No. 117 |
| 04 | 36 JB00 22 | Air screw Kit | 1 | 1 | From 01.01.2011 |
| 05 | 36 PA00 11 | Jet Kit | 1 | 1 | Refer Page No. 117 |
| 05 | 36 JB00 21 | Jet Kit | 1 | 1 | From 01.01.2011 |
| 06 | 36 PA00 13 | Idling screw kit | 1 | 1 | Refer Page No. 118 |
| 07 | JB 5812 29 | Valve Comp. float (Float pin) | 1 | 1 | |
| 08 | JB 5812 30 | Float Comp. | 1 | 1 | |
| 09 | JB 5812 32 | Screw washers bowl M4x14 | 1 | 1 | |
| 10 | JB 5812 48 | Screw TPS & Solenoid choke | 1 | 1 | |
| 11 | JB 5812 55 | Solenoid choke assly | 1 | 1 | |
| 12 | JB 5812 47 | "O" ring solenoid choke | 1 | 1 | |
| 13 | JB 5812 02 | Throttle position sensor | 1 | 1 | |
| 14 | JB 5812 04 | "O" Ring (TPS) | 1 | 1 | |
| 15 | JB 5812 57 | Tube Over Flow | 1 | 1 | |
| 16 | JB 5812 58 | Tube Air Vent | 1 | 1 | |
| 17 | JB 5812 59 | Clip | 1 | 2 | |
| 18 | 36 PA00 14 | Throttle Value Kit | 1 | 1 | Refer Page No. 118 |
| 19 | 36 PA00 15 | Carb. Gasket ‘O’ ring | 1 | 1 | Refer Page No. 118 |
| 20 | JB 5812 56 | Arm Pin Float | 1 | 1 | |
| 21 | JB 5812 60 | Drain Screw | 1 | 1 | |
| 22 | JB 5812 76 | Jet Needle | 1 | 1 | |
| 23 | PF 5813 09 | Lever Comp. Starter-Manuual | -- | 1 | NP-22-30/04/12 (4 Speed) |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Discover 100 REV 03 JUL 13 |
| Engine | 100 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
