Handle Bar(SPC_Discover 125_BS IV)
- $0.00
Handle Bar
(SPC_Discover 125_BS IV)
| Sub-part-figure Number | Item Code | Sub Part Name | Disc 125 Drum | Disc 125 Disc | Remarks |
|---|---|---|---|---|---|
| 01 | DS 1810 44 | Handle Bar | 1 | 1 | |
| 02 | JB 4014 00 | Control Switch LH | 1 | 1 | |
| 03 | JZ 4014 08 | Control Switch RH | 1 | 1 | |
| 04 | JZ 1610 23 | Lever & Holder Assembly LH | 1 | 1 | |
| 05 | DS 1910 15 | Grip LH | 1 | 1 | |
| 06 | DJ 1910 83 | Lever Grip Left | 1 | 1 | |
| 07 | JZ 4014 03 | Clutch Switch with Vertical Base | 1 | 1 | |
| 08 | DS 1910 52 | Boot for Lever LH | 1 | 1 | |
| 09 | DJ 2210 03 | Mirror Assly. LH | 1 | 1 | |
| 10 | DJ 2210 04 | Mirror Assly. RH | 1 | 1 | |
| 11 | 36 DS18 01 | Kit Holder Handle | 2 | 2 | |
| 12 | DS 1910 18 | Boot for Lever RH | 1 | -- | |
| 13 | 39171404 | Flange Bolt | 4 | 4 | |
| 14 | DS 1810 07 | Washer Handle Upper | 2 | 2 | |
| 15 | DS 1810 08 | Damper Handle Upper | 2 | 2 | |
| 16 | DS 1810 09 | Damper Handle Lower | 2 | 2 | |
| 17 | DS 1810 10 | Washer Handle Lower | 2 | 2 | |
| 18 | 39224915 | Nylock Nut | 2 | 2 | |
| 19 | DL 1910 14 | Stud Lever LH | 1 | 1 | |
| 20 | 30191048 | Band | 2 | 2 | |
| 21 | JZ 2326 01 | Lock Set + Tank Cap | 1 | 1 | |
| 22 | LA E000 21 | Flange Bolt | 2 | 2 | |
| 23 | JZ 1510 23 | Holder Fork Upper | 1 | 1 | |
| 24 | DU 2010 46 | Plunger With Spring | 1 | 1 | |
| 25 | DX 1910 01 | Throttle Pipe | 1 | 1 | |
| 26 | DS 1910 16 | Hand Grip RH | 1 | 1 | |
| 27 | DH 1810 22 | Handel Bar Weight | 2 | 2 | |
| 28 | 39242704 | Socket Bolt | 2 | 2 | |
| 29 | DX 1910 09 | Lever Assembly RH | 1 | - | |
| 30 | DD 1911 42 | Lever Grip RH | 1 | - | |
| 31 | DS 1910 38 | Holder RH | 1 | - | |
| 32 | JD 4022 17 | Band (L 150) | 1 | 1 |
| Specification | |
| Quality | Bajaj Geniune Parts |
| Model | Discover BS IV REV 06 Jun 2017 |
| Engine | 125 CC |
Reviews
Note :All information contained in this manual is based on the latest product information at the time of publication. Eskay Automotive accepts no liability for any inaccuracies or omissions in this publication, although every possible care has been taken to make it as complete and accurate as possible. All procedures and specifications subject to change without prior notice. The right is reserved to make such changes at any time without prior notice and without incurring an obligation to make such changes to product manufactured previously. Contact us for the latest information on product improvements incorporated after this manual was issued.
